From 039bbf24263aa5782d290410206eedfb9354b237 Mon Sep 17 00:00:00 2001
From: Max Christian Pohle
Date: Sun, 13 May 2018 18:36:47 +0200
Subject: Dropped lightline, now using a custom statusline
It displays everything what lightline did before, but I took special
care to make it compatible with all colorschemes I am using.
---
vimrc-custom-statusline | 1221 -----------------------------------------------
1 file changed, 1221 deletions(-)
delete mode 100644 vimrc-custom-statusline
(limited to 'vimrc-custom-statusline')
diff --git a/vimrc-custom-statusline b/vimrc-custom-statusline
deleted file mode 100644
index 19942cd..0000000
--- a/vimrc-custom-statusline
+++ /dev/null
@@ -1,1221 +0,0 @@
-" vim: noai:ts=2:sw=2:sts=2 iskeyword+=\:,\!,\<,\>,\-,\& number
-
-"=======================================================================================================================
-" GENERAL:
-"=======================================================================================================================
-set exrc | " enable exrc, a specific .exrc per project, which can contain usual .vimrc commands
-set textwidth=0 | " better done with modeline or local exrc and not here
-set ts=4 sts=4 sw=4 expandtab | " better done with a modeline or local exrc
-set virtualedit=all | " virtual edit should be default behaviour, because I don't see any reason against
-set nonumber norelativenumber | " do not show numbers by default, because that causes a performance loss, instead activate them on a file type basis
-set ignorecase smartcase hlsearch | " search with ignore case by default, but use case sensitive search when one capital char is contained and highlight while typing (even though its slower)
-set cindent cinoptions+=(0 | " indent at parentheses
-
-
-set path+=** | " allow recursive searches for files
-let &path = &path.",/usr/lib/modules/".substitute(system('uname -r'), "\n", "", "")."/build/include"
-
-"=======================================================================================================================
-" SHELL
-"=======================================================================================================================
-if filereadable("/bin/bash")
- set shell=/bin/bash | " many scripts rely on bash, but its path varies why it is commented out here
-elseif filereadable("/usr/local/bin/bash")
- set shell=/usr/local/bin/bash
-endif
-
-"=======================================================================================================================
-" Persistent undo
-"=======================================================================================================================
-if has('persistent_undo')
- if isdirectory('/dev/shm')
- set undodir=/dev/shm/ | " save undo file in memory. That is volatile, but fast and we have GIT for longer lasting undoes
- set directory=/dev/shm/ | " swap file directory to RAM
- set swapfile
- elseif isdirectory('/tmp/')
- set undodir=/tmp/
- endif
- set undofile | " preserve undo history when closing and reopening buffers (see :help undo-persistence)
-endif
-
-"=======================================================================================================================
-" multi byte
-"=======================================================================================================================
-if has("multi_byte")
- scriptencoding utf-8 | " tell vim that we are using UTF-8 here
- set encoding=utf-8 | " we need default UTF-8 encoding to use cool chars as line break and so on (see below)
- let &termencoding=&encoding | " once we use special chars we assume everybody uses a terminal supporting those
-
- set fillchars+=fold:\ | "
- set fillchars+=vert:\║ | " cool vertical split char
- set fillchars+=diff:\ | " a white space gets used here
-
- set listchars= | " initialize empty listchars
- set listchars+=extends:» | " symbols used when using :set list (which displays non-printable chars)
- set listchars+=precedes:« | " symbols used when using :set list (which displays non-printable chars)
-
- set listchars+=tab:▏\ | "
- set listchars+=trail:· | " symbols used when using :set list (which displays non-printable chars)
- " set listchars+=eol:↲ | " symbols used when using :set list (which displays non-printable chars)
- " set listchars+=space:· | " symbols used when using :set list (which displays non-printable chars)
- set showbreak+=› | " symbol used in the beginning of a wrapped line
-
- " automatically enter list mode when going in insert mode (makes above syntax command temporarily ineffective)
- set nolist
- autocmd InsertEnter * set list
- autocmd InsertLeave * set nolist
-" set fillchars+=stlnc:\― | "
-end
-
-
-"=======================================================================================================================
-" SPELL_CHECKING
-"=======================================================================================================================
-let g:spellfile_URL='http://ftp.vim.org/vim/runtime/spell'
-" add local user default spell file as primary source for words
-let &spellfile=fnamemodify($MYVIMRC, ":p:h")."/spell/spellfile-user.UTF-8.add"
-
-set nospell | " disable spell checker by default
-set spelllang=en,de | " languages for the spell checker
-set spellsuggest=10 | " how many words will z= suggest?
-set thesaurus+=~/.vim/thesaurus/php.txt
-
-"=======================================================================================================================
-" cscope
-"=======================================================================================================================
-" http://vim.wikia.com/wiki/Cscope
-if has('cscope') " compiled with cscope support?
- set cscopetag " CTRL-] uses cscope first, then ctags
- set cscopeverbose
-
- if has('quickfix')
- set cscopequickfix=s+,c+,d+,i+,t+,e+
- endif
-
- if has('menu')
- 1001menu &Cscope.find.c\ symbol
- \<tab>s
- \ :cscope find s <cword><:cR>
- 1001menu &Cscope.find.definition
- \<tab>g
- \ :cscope find g <cword><:cR>
- 1001menu &Cscope.find.functions\ called\ by\ this
- \<tab>d
- \ :cscope find d <cword><:cR>
- 1001menu &Cscope.find.functions\ calling\ this
- \<tab>c
- \ :cscope find c <cword><:cR>
- 1001menu &Cscope.find.text\ string
- \<tab>t
- \ :cscope find t <cword><:cR>
- 1001menu &Cscope.find.egrep\ pattern
- \<tab>e
- \ :cscope find e <cword><:cR>
- 1001menu &Cscope.find.this\ file
- \<tab>f
- \ :cscope find f <cword><:cR>
- 1001menu &Cscope.find.files\ including\ this\ file
- \<tab>i
- \ :cscope find i <cword><:cR>
- 1001menu &Cscope.find.places\ where\ this\ symbol\ is\ assigned\ a\ value
- \<tab>a
- \ :cscope find a <cword><:cR>
- 1001menu &Cscope.-Sep1-
- \ :
- 1001menu &Cscope.create\ and\ add\ database
- \ :cscope kill -1<CR>:execute '!find -type f -regex ".*\.\(c\\|h\\|cpp\\|cxx\\|hh\\|hpp\\|hxx\)$" <bar> cscope -i- -b -q -v'<CR>:cscope add .<CR>
- 1001menu &Cscope.-Sep2-
- \ :
- 1001menu &Cscope.add\ \.
- \ :cscope add .<CR>
- 1001menu &Cscope.show
- \ :cscope show<CR>
- 1001menu &Cscope.reset
- \ :cscope reset<CR>
- endif
-endif
-
-" ======================================================================================================================
-" GUI_VERSION
-" ======================================================================================================================
-if has("gui_running")
- set guicursor=a:block-blinkon100
- set browsedir=buffer
- set toolbar+=text
- set guiheadroom=0
- set guioptions+=eig
- set guioptions-=T | " toolbar
- set guioptions+=c | " use console dialogues instead of popups
- set guioptions+=a | " auto select: copy&paste using middle click
- set guioptions+=m | " remove menu
- set guioptions-=e | " do not display tabs
- set guioptions-=L | " do not show left scrollbar
- set guioptions-=r | " do not show right scrollbar
- set winaltkeys=menu | " behave like other windows: ALT-key can be used to open the menu (and cannot be :remaped)
-" set selectmode=mouse,key,cmd | " enters vim's select mode when pressing shift-left or shift-END
-" set keymodel=startsel,stopsel | " makes shift-left, shift-right available for selecting text
-
-
- " its possible to define alternative fonts (order matters)
- set guifont=Hasklug\ Nerd\ Font\ Mono\ Semi-Bold\ 10
- set guifont+=Hasklig\ Semi-Bold\ 10
- set guifont+=Bitstream\ Vera\ Sans\ Mono\ 10
- set guifont+=Monospace\ 10
- set guifont+=FuraMono\ Nerd\ Font\ Mono\ Medium\ 11
- set guifont+=Source\ Code\ Pro\ for\ Powerline\ SemiBold\ 10
- set guifont+=LiterationMono\ Nerd\ Font\ Mono\ 10
- set guifont+=RobotoMono\ Nerd\ Font\ Medium\ 10
- set guifont+=Source\ Code\ Pro\ Semi-Bold\ 10
- set guifont+=Dejavu\ Sans\ Mono\ for\ Powerline\ Semibold
- set guifont+=Droid\ Sans\ Mono\ for\ Powerline\ 10
- set guifont+=Meslo\ LG\ M\ for\ Powerline\ 10
-
- " like in the terminal: use Ctrl-shift-v for paste in vim's command editor
- cnoremap <c-s-v> <c-r>*
-endif
-
-" ======================================================================================================================
-" SETTINGS:
-" ======================================================================================================================
-set breakindent | " Every wrapped line will continue visually indented
-set clipboard=unnamedplus | " makes copy and paste work (autoselectplus might work as well)
-set concealcursor=nc | " limits the display of concealed text to normal and command mode
-set conceallevel=2 | " replace escaped chars by their UTF-8 representation (useful for LaTeX)
-set confirm | " asks 'do you want to save?'
-set cpoptions+=P | " makes :w filename set the current buffer to filename
-set hidden | " allows switching buffers even if the current buffer contains changes (displays +)
-set linebreak | " wrap long lines at char 'breakat', not inside words
-set mousemodel=popup | " only in gvim: right click opens a pop-up-menu
-set mouse=n | " allow mouse in normal mode only, so one can use the terminals c&p feature in insert mode
-set noautochdir | " When on, Vim will change the current working directory
-set nostartofline | " when scrolling: do not move the cursor to column 1
-set nowrap | " but do not (by default) wrap long lines around
-set nrformats+=alpha | " allows CTRL-A & CTRL-X to increment and decrement letters, not just numbers
-set incsearch | " highlight pattern while entering it (performance wise this isn't that good)
-
-if has('nvim') " Neovim?
-set inccommand=nosplit | " preview substitute and such things in real time
-endif
-
-set pumheight=8 | " Determines the maximum number of items to show in the pop-up menu for
-set scrolljump=5 | " how many lines get scrolled into view when cursor reaches the screens edge
-set scrolloff=0 | " keeps cursor centered
-set shiftround | " indent/un-indent snaps to multiple of shiftwidths
-set writedelay=0
-
-" display and performance
-set lazyredraw | " disables redraw during macro execution (improves performance)
-set cmdheight=2 | " sets the command line's height
-set signcolumn=auto | " auto=auto hide, yes=always, no=never show the column with error indicators
-set nocursorcolumn | " turn visual cursor column off (improves performance)
-set updatetime=80 | " updates the screen more often
-set redrawtime=1500 | " Timeout in milliseconds for redrawing the screen (switches syntax off when ssh too slow) / CTRL+L to retry
-set notimeout | " improves performance but is known to cause problems on slow terminals
-set ttimeout ttimeoutlen=150 | " set Esc key timeout in ms-
-set showcmd | " essential: show keys of combined commands in the lower right corner (BUT SLOW, makes cursor flickering)
-set showtabline=2 | " 0: never, 1: only if there are at least two tabs, 2:always
-set shortmess+=I | " don't give the intro message when starting Vim |:intro|.
-set wildmenu | " use a menu in the command line
-set wildmode=longest:full | " do not preselect any entry and show all possible
-
-" code completion
-" set dictionary=/usr/share/dict/cracklib-small
-" set complete+=k " make default completer <C-N> respect the dictionary
-set complete-=u " scan current and included files
-set complete+=i " scan current and included files
-set complete+=d " scan current and included files for defined name or macro
-set complete+=d | " scan current and included files for defined name or macro
-set complete+=i | " scan current and included files for completions
-set tagcase=match | " tagcase match, because we mostly use ^] to jump around and that variant respects the upper/lower case [followscs, followic, match, ignore]
-set tags+=../tags
-
-" code folding...
-set nofoldenable | " disable folding, because we have zi to toggle foldenable :)
-set foldclose=all | " automatically fold, when the cursor leaves the folded area
-set foldcolumn=0 | " I think I don't need this second indicator
-" set foldmethod=syntax | " foldlevel: syntax, indent, manual / foldmethod=syntax makes Vim incredible slow
-set foldnestmax=1 | " top level folding only
-set foldopen=block,hor,search | " when do we unfold?
-" set foldtext=Foldtext() | "
-" set foldtext=v:folddashes.substitute(getline(v:foldstart),'\\v^/[/*]\','','g')
-" set foldtext='⊞\ '.substitute(getline(v:foldstart),'^[\ '.printf(&cms,'').']*','','').'↵'.getline(v:foldstart+1).'↵'.getline(v:foldstart+2)
- set foldtext='⊞\ '.substitute(join(getline(v:foldstart,v:foldend),'↵'),'\[*\/\]','','g')
-
-" vim window behaviour
-set splitbelow | " open new windows below the current one (i find that more intuitive)
-set winminwidth=0 | " (and all other windows, so TODO: watch out)
-set winwidth=30 | " keep NERDTreeWindow at least this size
-
-
-" vim session handling and restore behaviour
-set viminfo+=% | " restore buffer list
-set sessionoptions=
-set sessionoptions+=buffers
-set sessionoptions+=curdir
-set sessionoptions+=folds
-set sessionoptions+=resize
-set sessionoptions+=slash
-set sessionoptions+=tabpages
-set sessionoptions+=unix
-set sessionoptions+=winpos
-set sessionoptions+=winsize
-
-
-" set nocindent smartindent | " use smart indent rather then cindent
-set noautoindent
-set nosmartindent
-
-set noshiftround | " indent/un-indent sna=ps to multiple of shiftwidths
-set noequalalways | " do not evenly size windows when opening new or closing old
-set nocursorline | " turn visual cursor line off (improves performance)
-"=======================================================================================================================
-
-" Vim 8 has a terminal command...
-if has('terminal')
- " use default ESC key to leave insert mode in the internal terminal emulator
- tnoremap <Esc> <C-W>N
- " make terminal windows hidden by default (copied from :help terminal)
- autocmd BufWinEnter * if &buftype == 'terminal' | setlocal bufhidden=hide | endif
-endif
-
-
-" NEOVIM_incompatible:
-"
-if has('nvim') " Neovim?
- autocmd TermOpen term://* set nobuflisted
- " use default ESC key to leave insert mode in the internal terminal emulator
- tnoremap <Esc> <C-\><C-n>
-" set shada+=n~/.vim/shada | " shada file to use
-"
- menu &UI.&Open\ in\ Serversession
- \ :execute ':!nvr --servername /tmp/nvimsocket --remote % +'.line('.')<CR>:stopinsert<CR>:set readonly<CR>
-
-else " default Vim?
- autocmd VimLeave * call system("echo -n $'" . escape(getreg(), "'") . "' | xsel -ib")
-
- set ttymouse=xterm2
- set ttyscroll=100 | " improves speed for terminal vim, incompatible with nvim
- set ttyfast | " improves speed for terminal vim (incompatible with nvim)
- set nottybuiltin | " use external termcaps
- set restorescreen | " restores the console after exiting vim (intentionally not in nvim)
- "
- let g:loaded_ruby_provider = 1 " disable ruby support
- let g:loaded_python_provider = 1 " disable python 3
-
- if version >= 702 " clean up (see: http://vim.wikia.com/wiki/VimTip396)
- autocmd BufWinLeave * call clearmatches()
- endif
-
-
- " scripts from the default vim installation, which do not get loaded by default, but are useful.
- if filereadable($VIMRUNTIME.'/macros/editexisting.vim')
- packadd! editexisting
- endif
-
- " load default plugin 'matchit' to allow % to jump between tags
- if filereadable($VIMRUNTIME.'/macros/matchit.vim')
- packadd! matchit
- endif
-
-endif
-
-
-if has("autocmd")
- set modeline | " set variables specific to a file, like indentation by adding a comment
- " set default completion function in case YouCompleteMe cannot help
- " set omnifunc=syntaxcomplete#Complete
-
- augroup set_window_title " {
- " autocmd BufEnter * let &titlestring = hostname() . "[vim(" . expand("%:t") . ")]"
- autocmd CursorHold * let &titlestring = "%t %y ".$USER."@".hostname().":%{expand(\"%:~:.:h\")}"
- set title
- " autocmd CursorHold * let &titlestring = "Vim (".airline#extensions#tagbar#currenttag().")"
-
- " set window title for screen(3)
- if &term == "screen"
- set t_ts=k
- set t_fs=\
- endif
- if &term == "screen" || &term == "xterm"
- set titlelen=40
- set title
- endif
- augroup END
-
- augroup ChangeIcon
- "if filereadable("/usr/bin/xseticon")
- "if filereadable("~/.vim/nvim.png")
- " autocmd VimEnter * silent :execute "!xseticon -id $WINDOWID ~/.vim/nvim.png"
- " autocmd VimLeave * silent :execute "!xseticon -id $WINDOWID /usr/share/icons/gnome/32x32/apps/xfce-terminal.png"
- "endif
- "endif
- augroup END
-
- " Fix terminal title =================================================================================================
- " autocmd VimEnter * let &t_EI .= "\<Esc>[0 q"
- " autocmd VimEnter * let &t_SI = "\<Esc>]12;green\x7"
- autocmd VimLeave * silent !echo -ne "\033]112\007"
-
- " highlight word under the cursor ====================================================================================
- let w:m1 = 0
- function! HighlightWordUnderCursor()
- if(exists('w:m1') && w:m1 > 0)
- silent! call matchdelete(w:m1)
- let w:m1 = 0
- endif
- let l:currentword = escape(expand('<cword>'), '.')
- if(strlen(l:currentword) > 0)
- let w:m1=100
- silent! call matchadd('BoldUnderline', '\<'.l:currentword.'\>', -1, w:m1)
- endif
- endfunction
- autocmd! CursorHold,CursorHoldI * call HighlightWordUnderCursor()
-
- " hitting K over a keyword shows a help in a buffer.
- " Here we define the commands used to look those keywords up
- " as per file type...
- augroup filetype_specific
- autocmd FileType python setlocal keywordprg=pydoc
- autocmd FileType vim setlocal keywordprg=:help |.
- autocmd FileType c,cpp setlocal equalprg=clang-format
- autocmd FileType c,cpp setlocal breakat-=-
-
- if filereadable("/usr/bin/vendor_perl/ack")
- autocmd FileType c,cpp set grepprg=/usr/bin/vendor_perl/ack\ --type=cc\ --nogroup\ --column\ $*
- autocmd FileType c,cpp set grepformat=%f:%l:%c:%m
- endif
-
- autocmd BufWinEnter * if &previewwindow | setlocal nonumber signcolumn=no filetype=c nobuflisted | endif
-
-
- " autocmd FileType c,cpp setlocal iskeyword-=_
-
- " the following helps to make file=/etc/something work with gf, but disallows filenames with an equal sign in them
- autocmd FileType conf setlocal isfname-==
-
-
- autocmd Filetype css command! CSSsort :g/{/+1;/}/-1 sort
-
- " keyboard mapping for xml alike languages
- " Alt-Up : Move cursor up one tag
- " Alt-Down: Move cursor down one tag
- " leader-=: tidies currently selected tag and subtags and sorts attributes by name (alphabetically)
- autocmd Filetype html,markdown,xml iabbrev </ </<C-X><C-O>
- autocmd Filetype html,htmldjango,xml
- \ :nnoremap
- \ <M-Down>
- \ :call search('^ *<', 'e')<CR>:nohlsearch<CR>|
- \ :nnoremap
- \ <M-Up>
- \ :call search('^ *<', 'eb')<CR>:nohlsearch<CR>|
- \ :nnoremap
- \ <leader>=
- \ vat:'<,'>!tidy -xml --wrap 0 --sort-attributes alpha 2>/dev/null<CR>vat=
- augroup END
-
- " autocmd BufNewFile set nobuflisted
- " use the shada/viminfo file to return the cursor to where it was...
- autocmd BufReadPost * call setpos(".", getpos("'\""))
-
- augroup CurrentFileName
- " highlight the current files name inside the document...
- let @g = ":exe ':match SpellBad /'.escape(expand('%:t'), '.').'/'"
- " put the current files name after the cursor...
- let @f = ":exe ':normal a'.expand('%:t')"
-
- " grep all buffers for a given string and return result in a quickfix window
- let @q = ":cex [] | bufdo vimgrepadd /foo/g % | cw"
-
- let @l = ":let g:signify_vcs_cmds={'git': 'git diff --no-color --no-ext-diff -U0 HEAD^ -- %f'}|:SignifyRefresh"
-
- if has('menu')
- source $VIMRUNTIME/menu.vim
- set wildmenu
- set cpo-=<
- set wcm=<C-Z>
-
- 01menu &Functions.toggle\ file\ browser
- \<Tab><leader><leader>
- \ <leader><leader>
- 01menu &Functions.-Sep0- :
-
- 01menu &Functions.help
- \<Tab><F1>
- \ <F1>
- 01menu &Functions.bp:\ previous\ buffer
- \<Tab><F2>
- \ <F2>
- 01menu &Functions.bn:\ next\ buffer
- \<Tab><F3>
- \ <F3>
- 01menu &Functions.^wc\:\ close\ window
- \<Tab><F4>
- \ <F4>
- 01menu &Functions.-Sep1- :
-
- 01menu &Functions.make
- \<Tab><F5>
- \ <F5>
- 01menu &Functions.clear\ matches,\ update\ viewport
- \<Tab><F6>
- \ <F6>
- 01menu &Functions.copen\:\ show\ quickfix\ list
- \<Tab><F7>
- \ <F7>
- 01menu &Functions.lopen\:\ show\ location\ list
- \<Tab><F8>
- \ <F8>
- 01menu &Functions.-Sep2- :
-
- 01menu &Functions.toggle\ tagbar
- \<Tab><F9>
- \ <F9>
-
- if has("gui_running") == 0
- " in the gui F10 already triggers the menu, not in a terminal vim, so upgrade that...
- map <F10> :emenu <C-Z>
- endif
- 01menu &Functions.activate\ menu\ (:emenu)
- \<Tab><F10>
- \ <F10>
-
- 01menu &Functions.undef11
- \<Tab><F11>
- \ <F11>
- 01menu &Functions.undef12
- \<Tab><F12>
- \ <F12>
- 01menu &Functions.-Sep2- :
-
-
- 09menu &Directory.print\ current\ directory
- \<Tab>:pwd
- \ :pwd<CR>
-
- 09menu &Directory.-Sep- :
-
- 09menu &Directory.Change\ to\ GIT\ root
- \<Tab>:Gcd
- \ :Gcd<CR>:pwd<CR>
-
- 09menu &Directory.Change\ to\ current\ buffers\ directory\ (global)
- \<tab>:cd\ %:p:h
- \ :cd %:h<CR>:pwd<CR>
-
- 09menu &Directory.Change\ to\ current\ buffers\ directory\ (local\ window)<tab>:lcd\ %:p:h
- \ :lcd %:p:h<CR>:pwd<CR>
-
- menu &Git.&Display\ last\ changes
- \ :let g:signify_vcs_cmds={'git': 'git diff --no-color --no-ext-diff -U0 HEAD^ -- %f'}<CR>:SignifyRefresh<CR>
- menu &Git.&Display\ significance\ of\ changes
- \ :!git diff --stat HEAD~1..HEAD
- menu &Git.&Display\ Changed\ files\ compared\ to\ master
- \ :!git diff --name-status ..master
-
- menu &Match.Clear\ All\ Matches
- \<Tab><F6>
- \ :call clearmatches()<CR>
-
- menu &Match.-Sep- :
-
- menu &Match.&dispensable\ white\ spaces
- \ :call matchadd("Convention", '\s\+$', 0)<CR>
-
- menu &Match.&long\ lines\ (exeeding\ textwidth)
- \ :call matchadd("Convention", '\%>'.&textwidth.'v.', 0)<CR>
-
- menu &Match.Highlight\ current\ file\ name
- \ :call matchadd("Search", escape(expand('%:t'), '.'))<CR>
-
- " :execute ':match SpellBad /'.escape(expand('%:t'), '.').'/'<CR>
-
- menu &Window.-Sep- :
-
-
- menu &Window.Scratch
- \ :Scratch<CR>
-
-
- menu &Find.file\ under\ the\ cursor
- \<Tab>gf
- \ gf
-
- menu &Find.Open\ search\ results\ in\ location\ list
- \<Tab>:gf
- \ :execute ':vimgrep /'.escape(getreg('/'), '.').'/g %'<CR>
- \ :copen<CR>
-
- menu &Changes.list
- \<Tab>:changes
- \ :changes<CR>
- menu &Changes.-Sep- :
- menu &Changes.previous
- \<Tab>g;
- \ g;
- menu &Changes.next
- \<Tab>g,
- \ g,
-
- menu &Jump.list
- \<Tab>:jumps
- \ :jumps<CR>
- menu &Jump.-Sep1- :
- menu &Jump.previous\ position
- \<Tab>CTRL-O
- \ <C-O>
- menu &Jump.next\ position
- \<Tab>CTRL-I
- \ <C-I>
- menu &Jump.-Sep2- :
- menu &Jump.clear\ list
- \<Tab>:clearjumps
- \ :clearjumps
-
- 1000menu &Tag.list
- \<Tab>:tags
- \ :tags<CR>
- 1000menu &Tag.selection\ list
- \<Tab>:ts
- \ :ts<CR>
-
- 1000menu &Tag.-Sep1- :
-
- 1000menu &Tag.stack.jump\ older
- \<Tab><C-T>
- \ :po
- 1000menu &Tag.stack.jump\
- \<Tab>:ta
- \ :ta
- endif
-
- " autocmd BufEnter * @f
- augroup END
-
- " autocmd VimEnter * set nobuflisted
-endif
-
-
-" ======================================================================================================================
-" SHORTCUTS: custom shortcuts
-" inoremap <C-Space> <C-x><C-o>
-" inoremap <C-@> <C-Space>
-
-" Bind CTRL+Backspace to vim's version (CTRL+W) in " <CR> insert mode (only works with gvim)
-inoremap
- \ <C-Backspace>
- \ <C-W>
-
-" INDENTATION: allows un-indenting a selected block and keeps selection
-vnoremap < <gv
-vnoremap > >gv
-
-" make shift-home select to the beginning of the line
-nnoremap <s-home> v^
-nnoremap <s-end> v$
-
-nnoremap <s-down> vj
-vnoremap <s-down> j
-nnoremap <s-up> vk
-vnoremap <s-up> k
-
-
-" close current buffer with <leader>q...
-nnoremap <leader>q :bp<bar>sp<bar>bn<bar>bd<CR>.
-" google the word under the cursor
-nnoremap <leader>G :execute ":!xdg-open https://google.de/search?q=".expand("<cword>")
-
-nnoremap <silent> <F5> :make!<CR>
-nnoremap <silent> <F6> :silent syntax sync fromstart<CR>:nohlsearch<CR>:silent match<CR>:silent 2match<CR>:silent 3match<CR>
-nnoremap <leader>r :syntax sync fromstart
-
-nnoremap <silent> <A-Up> :wincmd k<CR>
-nnoremap <silent> <A-Down> :wincmd j<CR>
-nnoremap <silent> <A-Left> :wincmd h<CR>
-nnoremap <silent> <A-Right> :wincmd l<CR>
-
-" INSERT_MODE_MAPPINGS:
-" default copy&paste insert key binding (just in insert mode, so it doesn't conflict
-" with visual block mode)- would have been nice, but collides with c-w for digraphs
-" inoremap <C-V> <C-R>+
-"
-inoremap <C-S> <C-O>:w<CR>
-
-" NEOVIM_SPECIFIC:
-if has('nvim') " only neovim...
- " shortcut \t opens a terminal in a horizontal split
- nnoremap <leader>t :new +terminal<CR>
-endif
-
-
-
-" ======================================================================================================================
-" START: LOADING PLUGINS
-" ↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
-call plug#begin()
-" Colorschemes:
-Plug 'coderonline/vim-remote-menu'
-" Plug 'bbchung/clighter8'
-" Plug 'octol/vim-cpp-enhanced-highlight'
-" Plug 'vim-scripts/TagHighlight'
-" if ! exists('g:TagHighlightSettings')
-" let g:TagHighlightSettings = {}
-" endif
-" let g:TagHighlightSettings['TagFileName'] = 'tags'
-" let g:TagHighlightSettings['CtagsExecutable'] = 'ctags'
-
-Plug 'chriskempson/base16-vim' | " not just one high quality color scheme (all named base16-*)
-Plug 'NLKNguyen/papercolor-theme' | " the one I like the most
-
-Plug 'mhinz/vim-signify' | " uses the sign column to indicate added, modified and removed lines
-Plug 'tpope/vim-fugitive' | " the most complete GIT integration plugin
-Plug 'godlygeek/tabular' | " align code on a sign, like :Tab/=
-Plug 'severin-lemaignan/vim-minimap'
-Plug 'tpope/vim-surround' | " plugin makes cs"' inside a line replace " with '
-let g:signify_vcs_list = [ 'git' ] | " use signify only with git (improves speed when loading buffers, see :h signify)
-let g:signify_cursorhold_insert = 0
-let g:signify_cursorhold_normal = 0
-let g:signify_update_on_bufenter = 0
-let g:signify_update_on_focusgained = 0
-let g:signify_sign_show_count = 1
-
-" NERDTree: replaces NetRW, as long as it has so many bugs
-Plug 'scrooloose/nerdtree' | "
-let NERDTreeIgnore = ['\.aux$', '\.o$']
-let NERDTreeCascadeSingleChildDir = 0 | " I don't get how one can use <m> to create files in that included directory
-let NERDTreeChDirMode = 0
-let NERDTreeHiddenFirst = 1
-let NERDTreeMinimalUI = 1
-let NERDTreeShowBookmarks = 1 | " show bookmarks by default (when opening for the first time)
-let NERDTreeWinSize = 40
-let NERDTreeQuitOnOpen = 1
-
-" depending on if NERDTree has the focus:
-nnoremap <expr>
- \ <leader><leader>
- \ bufwinnr("%")==g:NERDTree.GetWinNum() ? ':NERDTreeClose<CR>' : ':NERDTreeFind<CR>'
-nnoremap <expr>
- \ <F2>
- \ bufwinnr("%")==g:NERDTree.GetWinNum() ? '<C-W><C-W>' : ':N<CR>'
-
-nnoremap <expr>
- \ <F3>
- \ bufwinnr("%")==g:NERDTree.GetWinNum() ? '<C-W><C-W>' : ':n<CR>'
-
-nnoremap <F4>
- \ :wincmd c<CR>
-" close NERDTree if it is the last remaining window (taken from the official documentation)
-" autocmd bufenter *
-" \ if (winnr("$") == 1 && exists("b:NERDTree") && b:NERDTree.isTabTree()) | q | endif
-"
-
-
-" map CTRL-PageUp/Down to next/previous buffer
-" and Shift-PageUp/Down to next/previous arglist file
-nnoremap <C-PageUp> :bn<CR>
-nnoremap <C-PageDown> :bp<CR>
-nnoremap <S-PageUp> :N<CR>
-nnoremap <S-PageDown> :n<CR>
-
-
-" Additional: ========================================.
-Plug 'sheerun/vim-polyglot' " better syntax highlighting/indentation for multiple languages
-let g:javascript_conceal_function = "ƒ"
-let g:javascript_conceal_null = "ø"
-let g:javascript_conceal_this = "@"
-let g:javascript_conceal_return = "⇚"
-let g:javascript_conceal_undefined = "¿"
-let g:javascript_conceal_NaN = "ℕ"
-let g:javascript_conceal_prototype = "¶"
-let g:javascript_conceal_static = "•"
-let g:javascript_conceal_super = "Ω"
-let g:javascript_conceal_arrow_function = "⇒"
-
-Plug 'majutsushi/tagbar' " superseeds taglist-plus, which isn't maintained any more
-let g:tagbar_autoclose = 0
-let g:tagbar_autofocus = 1
-let g:tagbar_autoshowtag = 0
-let g:tagbar_compact = 1
-let g:tagbar_indent = 0
-let g:tagbar_foldlevel = 99
-
-nnoremap <F9> :TagbarToggle<CR>| " bind TagBar to hotkey F9
-
-
-" LIGHTLINE: a fancy status line =======================================================================================
-"
-set noshowmode | " mode will be shown twice, in lightline and below, so we want to deactivate one
-set laststatus=2 | " required by AirLine and Lightline, without status line does not appear until a window split
-
-" set statusline=\ %##%{(&modified?nr2char(0xF0C7):'')}%{(&readonly\ ?\ ''\ :\ '')}%)%{fnamemodify(getcwd(),':~')}%{nr2char(0x20)}%{nr2char(0xE0B1)}%{nr2char(0x20)}%f%{nr2char(0xf05b)}%y%*%=%l:%c(%p%%)
-"
-
-
-set statusline=
-set statusline+=%#StatusLineHighlight#
-set statusline+=%1*
-set statusline+=%{(&readonly\ ?\ '\ \ \ '\ :\ '')}
-set statusline+=%{(&modified\ ?\ nr2char(0xF0C7).'\ '\ :\ '')}
-set statusline+=%(%w%h%q\ %-8{mode()}%)
-set statusline+=%{nr2char(0xe621)}
-set statusline+=%(\ %{fnamemodify(getcwd(),\ ':~')}\ %)
-set statusline+=%{nr2char(0xf44a)}
-set statusline+=%(\ %f\ %)
-set statusline+=%2*
-set statusline+=%{nr2char(0xE0B4)\ }
-
-set statusline+=%=
-
-set statusline+=%2*
-set statusline+=%{nr2char(0xE0B6)}
-set statusline+=%1*
-set statusline+=%1(%) " a single space
-set statusline+=%{\ &filetype}
-set statusline+=%(\ %{nr2char(0xe621)}\ %)
-set statusline+=%{&fileencoding}
-set statusline+=%(\ %{nr2char(0xe621)}\ %)
-set statusline+=%{&fileformat}
-set statusline+=%(\ %{nr2char(0xe621)}\ %)
-set statusline+=%4l:%-4c
-set statusline+=%-3p%%
-
-
-set tabline=
-set tabline+=%1*
-set tabline+=%3(\ %)
-set tabline+=%{nr2char(0xe621)}
-set tabline+=%(%{v:servername}\ %{v:this_session}%)
-set tabline+=%2*
-set tabline+=%{nr2char(0xE0B4)\ }
-
-set tabline+=%=
-
-set tabline+=%2*
-set tabline+=%{nr2char(0xE0B6)}
-set tabline+=%1*
-set tabline+=%(\ \ %{fugitive#head()}\ %)
-set tabline+=%{nr2char(0xe621)}
-set tabline+=%(\ \ %{tabpagenr()}/%{tabpagenr('$')}\ %)
-set tabline+=%##
-" set statusline+=%t%m
-" set statusline+=%{TagInStatusLine()}
-" set statusline+=%#warningmsg#
-" set statusline+=%{SyntasticStatuslineFlag()}
-
-" Plug 'itchyny/lightline.vim'
-
-" lightline-buffer ui settings
-" replace these symbols with ASCII characters if your environment does not support unicode
-let g:lightline_buffer_logo = ''
-let g:lightline_buffer_readonly_icon = ''
-let g:lightline_buffer_modified_icon = '✭'
-let g:lightline_buffer_git_icon = ' '
-let g:lightline_buffer_ellipsis_icon = '..'
-let g:lightline_buffer_active_buffer_left_icon = ' '
-let g:lightline_buffer_active_buffer_right_icon = ''
-" let g:lightline_buffer_separator_icon = 'XX'
-
-" lightline-buffer function settings
-let g:lightline_buffer_show_bufnr = 0
-let g:lightline_buffer_rotate = 0
-let g:lightline_buffer_fname_mod = ':t'
-let g:lightline_buffer_excludes = ['vimfiler']
-let g:lightline_buffer_maxflen = 30
-let g:lightline_buffer_maxfextlen = 3
-let g:lightline_buffer_minflen = 16
-let g:lightline_buffer_minfextlen = 3
-let g:lightline_buffer_reservelen = 20
-
-" \ ['warnings', 'errors', 'syntastic']
-" \ 'left': [ [ 'bufferinfo' ], [ 'bufferbefore', 'buffercurrent', 'bufferafter' ], ],
-let g:lightline = {
- \ 'tabline': {
- \ 'left': [ [ 'servername', 'sessionname' ] ],
- \ 'right': [ [], ['gitbranch', 'tabnumber'] ],
- \ },
- \ 'colorscheme': 'Tomorrow_Night',
- \ 'separator': { 'left': "\uE0B4", 'right': "\uE0B6" },
- \ 'subseparator': { 'left': "\uE0b1", 'right': "\uE0b3" },
- \ 'inactive': {
- \ 'left': [ [ 'pwd', 'relativepath'] ],
- \ 'right': []
- \ },
- \ 'active': {
- \ 'left': [ [ 'mode', 'register', 'paste' ], [ 'pwd', 'relativepath' ] , ['tagbar']],
- \ 'right': [ [ 'lineinfo', 'percent' ], [ 'filetype', 'readonly', 'spell', 'fileencoding', 'fileformat' ] ]
- \ },
- \ 'component': {
- \ 'tagbar': '%{substitute(tagbar#currenttag("%s", "", "fs"), "\(.*\)", "", "")}',
- \ 'ycmparent': '%{substitute(execute("YcmComplete GetParent"), "\(.*\)", "", "")}',
- \ 'filename': '%t',
- \ 'buffer_alt': '%{expand("#:t")}',
- \ 'servername': ' %{v:servername}',
- \ 'sessionname': '%{v:this_session}',
- \ 'gitbranch': ' %{fugitive#head()}',
- \ 'tabnumber': " %{tabpagenr()}/%{tabpagenr('$')}",
- \ 'readonly': '%{&readonly ? "" : ""}',
- \ 'register': '%{v:register}',
- \ 'title': '%{getwinvar(0, "quickfix_title")}',
- \ 'pwd': '%{fnamemodify(getcwd(), ":~")}',
- \ 'relativepath': '%{fnamemodify(expand("%"), ":.")}'
- \ },
- \ 'component_expand': {
- \ 'buffercurrent': 'lightline#buffer#buffercurrent2',
- \ 'syntastic': 'SyntasticStatuslineFlag',
- \ },
- \ 'component_function': {
- \ 'bufferinfo': 'lightline#buffer#bufferinfo',
- \ 'warnings': 'youcompleteme#GetWarningCount',
- \ 'errors': 'youcompleteme#GetErrorCount',
- \ },
- \ }
-
-
-" Autocompleter: =====================================
-if has("python")
-
- " ULTISNIPS: code snippet ============================================================================================
- Plug 'honza/vim-snippets' " dependency of ultisnips (see below)
- Plug 'SirVer/ultisnips' " replaces loremipsum (and many more)
- " let g:UltiSnipsExpandTrigger = '<Tab>'| " expands the snippet, be careful not to use <tab> elsewhere (ycm uses it by default, but it has been deactivated by g:ycm_key_list_select_completion)
- let g:UltiSnipsExpandTrigger = '<Tab>'| " expands the snippet, be careful not to use <tab> elsewhere (ycm uses it by default, but it has been deactivated by g:ycm_key_list_select_completion)
-
- let g:UltiSnipsJumpForwardTrigger = '<Tab>'|
- let g:UltiSnipsJumpBackwardTrigger = '<S-Tab>'|
- "d let g:UltiSnipsJumpForwardTrigger = '<PageDown>'
- " let g:UltiSnipsJumpBackwardTrigger = '<PageUp>'
- "let g:UltiSnipsExpandTrigger = '<C-j>'| " Trigger configuration. Do not use <tab> if you use https://github.com/Valloric/YouCompleteMe.
- "let g:UltiSnipsJumpForwardTrigger = '<C-j>'| " \
- "let g:UltiSnipsJumpBackwardTrigger = '<C-k>'| " \
- "let g:UltiSnipsListSnippets = '<C-`>'| " YouCompleteMe includes those, so this isn't necessary
- "let g:UltiSnipsListSnippets = '<leader><leader>'| " YouCompleteMe includes those, so this isn't necessary
- """ Ultisnips
- " let g:UltiSnipsExpandTrigger="<c-tab>"
- " let g:UltiSnipsListSnippets="<c-s-tab>"
-
- if has('nvim')
- Plug 'Shougo/deoplete.nvim', { 'do': ':UpdateRemotePlugins' }
- " Use deoplete.
- let g:deoplete#enable_at_startup = 1
- inoremap <silent><expr> <C-Space> deoplete#mappings#manual_complete()
-
- Plug 'Shougo/echodoc.vim'
- let g:echodoc#enable_at_startup = 1
-
- " Plug 'Rip-Rip/clang_complete'
- " Plug 'tweekmonster/deoplete-clang2'
- " Plug 'zchee/deoplete-clang'
- " let g:deoplete#sources#clang#libclang_path = "/usr/lib/libclang.so"
- " let g:deoplete#sources#clang#clang_header = "/usr/lib/clang/6.0.0"
- " let g:deoplete#sources#clang#std#cpp = 'c++1z'
- " let g:deoplete#sources#clang#clang_complete_database = "/home/max/src"
- " Plug 'Shougo/neoinclude.vim' " makes vim slow - unfortunatelly
-
- Plug 'autozimu/LanguageClient-neovim', {
- \ 'branch': 'next',
- \ 'do': 'bash install.sh',
- \ }
-
- let g:LanguageClient_serverCommands = {
- \ 'cpp': ['clangd']
- \ }
- " Plug 'roxma/nvim-completion-manager' unmaintained python version
- else
- Plug 'idanarye/vim-vebugger'
-
- " YouCompleteMe: =====================================================================================================
- " Plug 'Valloric/MatchTagAlways' " highlights the closing tag/brace/...
- Plug 'Valloric/YouCompleteMe', {
- \ 'do' : 'python install.py --clang-completer',
- \ }
- let g:ycm_error_symbol = '✖' " insert this as an error symbol in the gutter bar/sign column
- let g:ycm_warning_symbol = '➔' " insert this as a warning symbol in the gutter bar/sign coloumn
-
- let g:ycm_autoclose_preview_window_after_insertion = 0
- let g:ycm_auto_trigger = 1
- let g:ycm_collect_identifiers_from_tags_files = 1 " Let YCM read tags from Ctags file
- let g:ycm_confirm_extra_conf = 0 " security is overrated ;)
-
- let g:ycm_key_list_previous_completion = ['Up']
- let g:ycm_key_list_select_completion = ['Down']
-
- " Plug 'vim-scripts/dbext.vim' " dependency to allow db related completions
- " let g:ycm_server_python_interpreter = 'python3'
- " let g:ycm_python_binary_path = '/usr/bin/python3' " the python interpreter of choice (for code checking)
- " let g:ycm_add_preview_to_completeopt = 1 " reuse existing preview window
- " let g:ycm_seed_identifiers_with_syntax = 1 " Completion for programming language's keyword
- " let g:ycm_complete_in_comments = 1 " Completion in comments
- " let g:ycm_complete_in_strings = 1 " Completion in string
- " let g:ycm_min_num_of_chars_for_completion = 6 " we normally avoid identifier based completion, it just helps with long words. Use semantic completions with <C-Space> instead (terrible idea, html snippets not working!)
- " let g:ycm_min_num_identifier_candidate_chars = 4
- " let g:ycm_max_num_identifier_candidates = 10
- " let g:ycm_max_num_candidates = 50
- " let g:ycm_use_ultisnips_completer = 1 " Default 1, just ensure
- " let g:ycm_key_list_select_completion = ['<Down>']
- " let g:ycm_key_list_previous_completion = ['<Up>']
- " let g:ycm_global_ycm_extra_conf = '.ycm_extra_conf.py'
- " let g:ycm_semantic_triggers = { 'c': [ 're!.' ] }
- " " let g:ycm_disable_for_files_larger_than_kb = 16384 " we have faaast computers, don't we?
- " let g:ycm_show_diagnostics_ui = 0
- " " disable <tab>-key for YCM so that it can be used with ultisnips
- " let g:ycm_key_list_select_completion=[]
- " let g:ycm_key_list_previous_completion=[]
- endif
-
-
- " SYNTASTIC: =========================================================================================================
- if has('nvim')
- Plug 'w0rp/ale'
- let g:ale_set_highlights = 0
- highlight! link ALEWarningSign FoldColumn
- let g:ale_sign_error = ''
- let g:ale_sign_style_error = ''
- let g:ale_sign_info = ''
- let g:ale_sign_warning = ''
- else
- Plug 'scrooloose/syntastic'
- set statusline+=%#warningmsg#
- set statusline+=%{SyntasticStatuslineFlag()}
- let g:LatexBox_latexmk_preview_continuously = 1
- let g:LatexBox_viewer = "evince"
- let g:syntastic_always_populate_loc_list = 1
- let g:syntastic_auto_loc_list = 0
- let g:syntastic_check_on_open = 1
- let g:syntastic_check_on_wq = 0
- " let g:syntastic_quiet_messages = {"type":"style"}
- "
- " E221: multiple spaces before Operator
- let g:syntastic_python_flake8_args = '--max-complexity=10 --max-line-length=120 --exclude venv --doctests --exit-zero --ignore=E221'
- " filter ( = do not display) style/formatting errors and warnings
- let g:syntastic_error_symbol = '✖'
- let g:syntastic_style_error_symbol = '✗'
- let g:syntastic_warning_symbol = '➔'
- let g:syntastic_style_warning_symbol = '≈'
- endif
-
- " JEDI: ==============================================================================================================
- Plug 'davidhalter/jedi-vim' " jedi gets used to display python function signatures
- let g:jedi#completions_enabled = 0 " we do not need completions, because we have YouCompleteMe
- let g:jedi#show_call_signatures = 1 " which sadly does not support signatures like jedi
- let g:jedi#show_call_signatures_delay = 0
- let g:jedi#auto_vim_configure = 0
- let g:pymode_rope = 0 " https://github.com/davidhalter/jedi-vim/issues/163
- " autocmd FileType python jedi.preload_module('os', 'sys', 'math')
- " let g:pymode_options_max_line_length = 120
- " let g:syntastic_python_flake8_args='--ignore=F821,E302,E501,E241,E301'
-
-endif " has("python")
-
-"=======================================================================================================================
-" TESTING: | " plugins which I am currently trying...
-"=======================================================================================================================
-" Plug 'rhysd/vim-clang-format' | unnecessary, because we can just :pyf /usr/share/clang/clang-format.py
-Plug 'kana/vim-operator-user' " dependency, which allows overriding the = operator for indentation
-
-" TODO: check if this is unrequired, when set equalprog is set to that py file
-autocmd FileType c,cpp,objc map <buffer> = :pyf /usr/share/clang/clang-format.py<CR>
-
-" let g:clang_format#detect_style_file = 1
-" autocmd FileType c,cpp,objc map <buffer> = <Plug>(operator-clang-format)
-
-" Plug 'tpope/vim-characterize' | " normal mode: make ga show character names of Unicode chars (ga shows hex and dec values)
-" Plug 'rkitover/vimpager'
-" found this command instead (use as PAGER):
-" man -P 'nvim -R -u NORC -c":%!col -b" -c":set buftype=nowrite filetype=man" -' ls
-
-command BuffersToArg :exec ':args '.join(map(range(0, bufnr('$')), 'fnameescape(fnamemodify(bufname(v:val), ":."))'))
-command BufToArg :argadd %:.
-
-"=======================================================================================================================
-call plug#end() | " all plugins are getting loaded on this line, don't remove!
-
-" ↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑
-" END: LOADING PLUGINS
-" ======================================================================================================================
-
-" Deprecated with this configuration, but still useful when deactivating some Plugins
-" NETRW: obsolete with NERDTree
-let g:netrw_alto = 0 | " open files on the right
-let g:netrw_altv = 1 | " open files on the right
-let g:netrw_banner = 0 | " display help messages?
-let g:netrw_browse_split = 4 | " 4=open in previous window
-let g:netrw_fastbrowse = 2 | " manually refresh direcory list (avoids display errors)
-let g:netrw_hide = 1 | " show not-hidden files only
-let g:netrw_keepdir = 0
-let g:netrw_list_hide = '^\..*' | " Explore mode: hide files starting with dot
-let g:netrw_liststyle = 3 | " 3=tree
-let g:netrw_preview = 0 | "
-let g:netrw_winsize = 20 | " window size in percent
-
-" ======================================================================================================================
-" COLORSCHEME:
-" ======================================================================================================================
-
-function! ExtendColorTheme()
- filetype on
- filetype plugin on
- filetype indent on
-
- syntax on | " enable syntax highlighting
- syntax sync minlines=60 | " how many preceding lines will be parsed? (has performance impact)
-
- " use the default terminal background color as background (allows transparency)
- " highlight! Normal guibg=NONE ctermbg=NONE
- " highlight! NonText guibg=NONE guifg=black ctermbg=NONE ctermfg=black
-
- " make the ~ (tilde) indicator invisible, which usually marks the EOF
- highlight! link EndOfBuffer Ignore
-
- highlight! CursorLineNr cterm=inverse | " ctermbg=black ctermfg=NONE
- highlight! Pmenu ctermbg=LightYellow ctermfg=DarkGrey
- highlight! PmenuSel ctermbg=blue ctermfg=LightYellow cterm=bold
-
- highlight! link PmenuSbar Pmenu
- highlight! PmenuThumb cterm=inverse
- highlight! MoreMsg cterm=inverse
- highlight! link Folded LineNr
- highlight! Cursor guibg=#729fcf ctermbg=yellow
- highlight! link VertSplit LineNr
- " highlight! SpellBad ctermbg=none
- highlight! SpecialKey ctermfg=19
- highlight! WhiteSpace ctermfg=19
-
- highlight! link TabLine LineNr
- highlight! TabLineSel ctermbg=blue ctermfg=black
- highlight! link TabLineFill LineNr
- highlight! Search ctermbg=LightYellow ctermfg=black guibg=#fefd86 guifg=#222222
- highlight! link WildMenu Search
-
- " generic, which should exist but don't
- highlight! Bold cterm=bold gui=bold
- highlight! Italic cterm=italic gui=italic
- highlight! Underline cterm=underline gui=underline
- highlight! BoldUnderline cterm=bold,underline gui=bold,underline
- highlight! BoldItalic cterm=Bold,Italic gui=Bold,Italic
-
- " make tab stop (see listchars) less disturbing...
- highlight! link SpecialKey NonText
-
- " highlight! link LightlineMiddle_tabline ColorColumn
- " highlight! link LightlineLeft_tabline_1 ColorColumn
- " highlight! link LightlineLeft_tabline_0_1 ColorColumn
-
- highlight! Todo guibg=#ffffaa guifg=#000000 gui=bold term=bold
- highlight! cStatement guifg=red gui=bold term=bold
-
- highlight! link Convention Error
-
- let g:status_fg=synIDattr(hlID('Cursor'), 'fg#')
- let g:status_bg=synIDattr(hlID('Cursor'), 'bg#')
- let g:status_sel=synIDattr(hlID('StatusLine'), 'fg#')
-
- execute 'highlight! StatusLine'
- \ .' guibg='.g:status_sel
- \ .' guifg=NONE'
-
- execute 'highlight! User1 guibg='.g:status_bg
- execute 'highlight! User1 guifg='.g:status_fg
-
- execute 'highlight! User2 guibg='.g:status_sel
- execute 'highlight! User2 guifg='.g:status_bg
-
-
-
- " autocmd InsertLeave * call matchadd('Conceal', ' \+$', -1, 101, { 'conceal': '⟶' })
- autocmd InsertEnter * silent! call matchdelete(101)
- autocmd InsertLeave * call matchadd('Convention', ' \+$', -1, 101, { 'conceal': '⟶' })
-
- " Show trailing whitepace and spaces before a tab as part of the syntax highlighting
- " autocmd BufEnter,InsertLeave * syntax match Convention /\s\+$\| \+\ze\t/ containedin=ALL
- " autocmd Syntax * syntax match Convention /\s\+$\| \+\ze\t/ containedin=ALL
- " autocmd BufEnter,BufWritePost * syntax match Convention /\s\+$\| \+\ze\t/ containedin=ALL
- " autocmd InsertEnter * syntax clear Convention
- " autocmd BufEnter,InsertLeave * execute ':syntax match Convention /\%>'.&textwidth.'v./ containedin=ALL'
-
- autocmd InsertEnter * set colorcolumn=80,120
- autocmd InsertLeave * set colorcolumn&
- " set colorcolumn= | " not used, because we have a :match directive for textwidth
- "
-" if argc() == 0
- " rv
- " autocmd VimEnter * split +bro\ ol
-" endif
-"
-
-endfunction
-autocmd! ColorScheme * call ExtendColorTheme()
-
-
-set termguicolors | " When on, uses highlight-guifg and highlight-guibg attributes in the terminal (=24bit color) incompatible with nvim
-" set t_ut=
-
-if filereadable(expand("~/.vimrc_background")) && filereadable(expand("~/.config/base16-shell/colortest"))
- let g:base16_shell_path="~/.config/base16-shell/scripts"
- let base16colorspace=256
- let syntax_cmd="skip" " vim internal, use base16 and no default colors
- set background=dark
- source ~/.vimrc_background
-else
- let g:PaperColor_Theme_Options = {
- \ 'theme': {
- \ 'default': {
- \ 'transparent_background': 1
- \ }
- \ }
- \ }
- set background=dark
- colorscheme PaperColor
-endif
-
-" ======================================================================================================================
-" CONVENIENCE:
-" ======================================================================================================================
-if empty(argv())
-
- " autocmd VimEnter * call setloclist(0, filter(map(copy(v:oldfiles), {_, p->{'filename': expand(get(split(p, "'"), 0))}}), { val -> echo val}))
-
- " from the list of recent files: make absolute paths, filter out files not
- " contained in cwd and finally filter out directories and non-files...
- autocmd StdinReadPre * let s:std_in=1
- autocmd VimEnter * if !exists("s:std_in") | call setqflist(map(filter(filter(
- \ map(copy(v:oldfiles), {_, p->expand(p)}), 'v:val =~ "'.getcwd().'"'),
- \ 'filereadable(v:val)'), {_, p->{'filename': fnamemodify(p, ':.')}})) | copen | only
-endif
-
-command Vimls
- \ call setloclist(0, map(getbufinfo({'buflisted':1}),
- \ "{'bufnr': v:val.bufnr,
- \ 'lnum': v:val.lnum,
- \ 'text': '='.printf('%*s, % 3d: %s [%s]', winwidth(0) / 2, '', v:val.bufnr, v:val.name, getbufvar(v:val.bufnr, '&buftype')),
- \ 'pattern': 'not loaded'}
- \ "))
-
-command Ctoggle
- \ if(get(getqflist({'winid':1}), 'winid') == win_getid())|cclose|else|botright copen|endif
-command Ltoggle
- \ if(get(getloclist(0, {'winid':1}), 'winid') == win_getid())|lclose|else|lopen|endif
-
-
-
-" nnoremap <silent> <ESC> :lclose<CR> " brings vim into REPLACE mode (R)
-nnoremap <silent> <F7> :Ltoggle<CR>
-nnoremap <silent> <F8> :Ctoggle<CR>
-nnoremap <silent> <F12> :Vimls<CR>:Ltoggle<CR>
-
-" exec current line as a command, insert output of command (from: https://youtu.be/MquaityA1SM?t=35m45s)
-nnoremap Q !!$SHELL<CR>
-
-
-" ======================================================================================================================
-" TESTING:
-" ======================================================================================================================
-" avoids openin an empty buffer when restoring bufferlist from viminfo...
-" if argc() == 0
-" silent autocmd VimEnter * nested :silent bun
-" endif
-
-autocmd VimEnter,WinEnter * exec ':set scrolljump='.winheight(0)/2
-
-" display highlight group under the cursor
-map <leader>h :echo map(synstack(line('.'), col('.')), 'synIDattr(v:val, "name")')<CR>
-
-" call setqflist( map(systemlist("git show --name-only --pretty=''"), {_, p->{'filename': fnamemodify(p, ':.')}}))
--
cgit v1.2.3