" vim: noai:ts=2:sw=2:sts=2 iskeyword+=\:,\!,\<,\>,\-,\&

"=======================================================================================================================
" GENERAL:
"=======================================================================================================================
set exrc                          | " enable exrc, a specific .exrc per project, which can contain usual .vimrc commands
set textwidth=120                 | " better done with modeline or local exrc
set ts=4 sts=4 sw=4 expandtab     | " better done with a modeline or local exrc
set virtualedit=all               | " virtual edit should be default behaviour, because I don't see any reason against
set nonumber norelativenumber     | " do not show numbers by default, because that causes a performance loss, instead activate them on a filetype basis
set ignorecase smartcase hlsearch | " search with ignorecase by default, but use case sensitive search when one captical char is contained and highlight while typing (even though its slower)

"=======================================================================================================================
" SHELL
"=======================================================================================================================
if filereadable("/bin/bash")
  set shell=/bin/bash           | " many scripts rely on bash, but its path varies why it is commented out here
elseif filereadable("/usr/local/bin/bash")
  set shell=/usr/local/bin/bash
endif

"=======================================================================================================================
" Persistent undo
"=======================================================================================================================
if has('persistent_undo')
  if isdirectory('/dev/shm')
    set undodir=/dev/shm/     | " save undo file in memory. That is volatile, but fast and we have GIT for longer lasting undos
    set directory=/dev/shm/   | " swap file directory to RAM
    set swapfile
  elseif isdirectory('/tmp/')
    set undodir=/tmp/
  endif
  set undofile                  | " preserve undo history when closing and reopening buffers (see :help undo-persistenece)
endif

"=======================================================================================================================
" multi byte
"=======================================================================================================================
if has("multi_byte")
  scriptencoding utf-8       | " tell vim that we are using utf-8 here
  set encoding=utf-8         | " we need default utf-8 encoding to use cool chars as line break and so on (see below)
  let &termencoding=&encoding | " once we use special chars we assume everybody uses a terminal supporting those

  set fillchars+=fold:\—     | "
  set fillchars+=vert:\║     | " cool vertical split char
  set fillchars+=diff:\      | " a whitespace gets used here

  set listchars=             | " initialize empty listchars
  set listchars+=extends:»   | " symbols used when using :set list (which displays non-printable chars)
  set listchars+=precedes:«  | " symbols used when using :set list (which displays non-printable chars)

  set listchars+=tab:▏\      | "
  set listchars+=trail:·     | " symbols used when using :set list (which displays non-printable chars)
  " set listchars+=eol:↲     | " symbols used when using :set list (which displays non-printable chars)
  " set listchars+=space:·   | " symbols used when using :set list (which displays non-printable chars)
  set showbreak+=›           | " symbol used in the beginning of a wrapped line
  set list
" set fillchars+=stlnc:\―       | "
end


"=======================================================================================================================
" SPELL_CHECKING
"=======================================================================================================================
let g:spellfile_URL='http://ftp.vim.org/vim/runtime/spell'
set nospell          | " disable spell checker by default
set spelllang=en,de  | " languages for the spell checker
set spellsuggest=10  | " how many words will z= suggest?
set thesaurus+=~/.vim/thesaurus/php.txt

set dictionary=/usr/share/dict/cracklib-small
set complete+=k " make default completer <C-N> respect the dictionary
set complete+=i " scan current and included files
set complete+=d " scan current and included files for defined name or macro

"=======================================================================================================================
" Cscope
"=======================================================================================================================
" http://vim.wikia.com/wiki/Cscope
if has('cscope') " compiled with cscope support?
  set cscopetag  " CTRL-] uses cscope first, then ctags
  set cscopeverbose

  if has('quickfix')
    set cscopequickfix=s+,c+,d+,i+,t+,e+
  endif

  if has('menu')
   1001menu &Cscope.find.c\ symbol
          \<tab>s
          \ :cscope find s <cword><:cR>
   1001menu &Cscope.find.definition
          \<tab>g
          \ :cscope find g <cword><:cR>
   1001menu &Cscope.find.functions\ called\ by\ this
          \<tab>d
          \ :cscope find d <cword><:cR>
   1001menu &Cscope.find.functions\ calling\ this
          \<tab>c
          \ :cscope find c <cword><:cR>
   1001menu &Cscope.find.text\ string
          \<tab>t
          \ :cscope find t <cword><:cR>
   1001menu &Cscope.find.egrep\ pattern
          \<tab>e
          \ :cscope find e <cword><:cR>
   1001menu &Cscope.find.this\ file
          \<tab>f
          \ :cscope find f <cword><:cR>
   1001menu &Cscope.find.files\ including\ this\ file
          \<tab>i
          \ :cscope find i <cword><:cR>
   1001menu &Cscope.find.places\ where\ this\ symbol\ is\ assigned\ a\ value
          \<tab>a
          \ :cscope find a <cword><:cR>
   1001menu &Cscope.-Sep1-
          \ :
   1001menu &Cscope.create\ and\ add\ database
          \ :cscope kill -1<CR>:execute '!find -type f -regex ".*\.\(c\\|h\\|cpp\\|cxx\\|hh\\|hpp\\|hxx\)$" <bar> cscope -i- -b -q -v'<CR>:cscope add .<CR>
   1001menu &Cscope.-Sep2-
          \ :
   1001menu &Cscope.add\ \.
          \ :cscope add .<CR>
   1001menu &Cscope.show
          \ :cscope show<CR>
   1001menu &Cscope.reset
          \ :cscope reset<CR>
  endif
endif

" ======================================================================================================================
" GUI_VERSION
" ======================================================================================================================
if has("gui_running")
  set guicursor=a:block-blinkon100
  set browsedir=buffer
  set toolbar+=text
  set guiheadroom=0
  set guioptions+=eig
  set guioptions-=T   | " toolbar
  set guioptions+=c   | " use console dialogs instead of popups
  set guioptions+=a   | " autoselect: copy&paste using middleclick
  set guioptions+=m   | " remove menu
  set guioptions-=e   | " do not display tabs
  set guioptions-=L   | " do not show left scrollbar
  set guioptions-=r   | " do not show right scrollbar
  set winaltkeys=menu | " behave like other windows: ALT-key can be used to open the menu (and cannot be :remaped)
" set selectmode=mouse,key,cmd  | " enters vim's select mode when pressing shift-left or shift-END
" set keymodel=startsel,stopsel | " makes shift-left, shift-right available for selecting text


  " its possible to define alternative fonts (order matters)
  set guifont=Hasklug\ Nerd\ Font\ Mono\ Semi-Bold\ 10
  set guifont+=Hasklig\ Semi-Bold\ 10
  set guifont+=Bitstream\ Vera\ Sans\ Mono\ 10
  set guifont+=Monospace\ 10
  set guifont+=FuraMono\ Nerd\ Font\ Mono\ Medium\ 11
  set guifont+=Source\ Code\ Pro\ for\ Powerline\ SemiBold\ 10
  set guifont+=LiterationMono\ Nerd\ Font\ Mono\ 10
  set guifont+=RobotoMono\ Nerd\ Font\ Medium\ 10
  set guifont+=Source\ Code\ Pro\ Semi-Bold\ 10
  set guifont+=Dejavu\ Sans\ Mono\ for\ Powerline\ Semibold
  set guifont+=Droid\ Sans\ Mono\ for\ Powerline\ 10
  set guifont+=Meslo\ LG\ M\ for\ Powerline\ 10

  " like in the terminal: use ctrl-shift-v for paste in vim's command editor
  cnoremap <c-s-v> <c-r>*
endif

" ======================================================================================================================
"  SETTINGS:
" ======================================================================================================================
set breakindent               | " Every wrapped line will continue visually indented
set clipboard=unnamedplus     | " makes copy and paste work (autoselectplus might work as well)
set concealcursor=nc          | " limits the display of concealed text to normal and command mode
set conceallevel=2            | " replace escaped chars by their utf-8 representation (useful for LaTeX)
set confirm                   | " asks 'do you want to save?'
set cpoptions+=P              | " makes :w filename set the current buffer to filename
set hidden                    | " allows switiching buffers even if the current buffer contains changes (displays +)
set linebreak                 | " wrap long lines at char 'breakat', not inside words
set mousemodel=popup          | " only in gvim: right click opens a popup-menu
set mouse=n                   | " allow mouse in normal mode only, so one can use the terminals c&p feature in insert mode
set noautochdir               | " When on, Vim will change the current working directory
set nostartofline             | " when scrolling: do not move the cursor to column 1
set nowrap                    | " but do not (by default) wrap long lines around
set nrformats+=alpha          | " allows CTRL-A & CTRL-X to increment and decrement letters, not just numbers
set path+=**                  | " allow recursive searches for files
set incsearch                 | " highlight pattern while entering it (performancewise this isn't that good)
set pumheight=8               | " Determines the maximum number of items to show in the popup menu for
set scrolljump=5              | " how many lines get scrolled into view when cursor reaches the screens edge
set scrolloff=0               | " keeps cursor centered
set shiftround                | " indent/unindent snaps to multiple of shiftwidths
set writedelay=0

" display and performance
set lazyredraw                | " disables redraw during macro exectution (improves performance)
set cmdheight=2               | " sets the command line's height
set signcolumn=yes            | " auto=auto hide, yes=always, no=never show the column with error indicators
set nocursorcolumn            | " turn visual cursor column off (improves performance)
set updatetime=80             | " updates the screen more often
set redrawtime=1500           | " Timeout in milliseconds for redrawing the screen (switches syntax off when ssh too slow) / CTRL+L to retry
set notimeout                 | " improves performance but is known to cause problems on slow terminals
set ttimeout ttimeoutlen=150  | " set esc key timeout in ms-
set showcmd                   | " essential: show keys of combined commands in the lower right corner (BUT SLOW, makes cursor flickering)
set showtabline=2             | " 0: never, 1: only if there are at least two tabs, 2:always
set shortmess+=I              | " don't give the intro message when starting Vim |:intro|.
set wildmenu                  | " use a menu in the command line
set wildmode=longest:full     | " do not preselect any entry and show all possible

" code completion
set complete+=d               | " scan current and included files for defined name or macro
set complete+=i               | " scan current and included files for completions
set tagcase=match             | " tagcase match, because we mostly use ^] to jump around and that variant respects the upper/lower case [followscs, followic, match, ignore]
set tags+=../tags

" code folding...
set nofoldenable              | " disable folding, because we have zi to toggle foldenable :)
set foldclose=all             | " automatically fold, when the cursor leaves the folded area
set foldcolumn=0              | " I think I don't need this second indicator
" set foldmethod=syntax         | " foldlevel: syntax, indent, manual / foldmethod=syntax makes Vim incredible slow
set foldnestmax=1             | " top level folding only
set foldopen=block,hor,search | " when do we unfold?
set foldtext=Foldtext()       | "

" vim window behaviour
set splitbelow                | " open new windows below the current one (i find that more intuitive)
set winminwidth=0             | " (and all other windows, so TODO: watch out)
set winwidth=30               | " keep NERDTreeWindow at least this size


" vim session handling and restore behaviour
set viminfo+=%                | " restore buffer list
set sessionoptions=
set sessionoptions+=buffers
set sessionoptions+=curdir
set sessionoptions+=folds
set sessionoptions+=resize
set sessionoptions+=slash
set sessionoptions+=tabpages
set sessionoptions+=unix
set sessionoptions+=winpos
set sessionoptions+=winsize


" set nocindent smartindent     | " use smart indent rather then cindent
set noautoindent
set nosmartindent
set cindent cinoptions+=(0    | " indent at parentheses

set noshiftround              | " indent/unindent sna=ps to multiple of shiftwidths
set equalalways               | " do not evenly size windows when opening new or closing old
set nocursorline              | " turn visual cursor line off (improves performance)
"=======================================================================================================================

" Vim8 has a terminal command...
if has('terminal')
  " use default ESC key to leave insert mode in the internal terminal emulator
  tnoremap <Esc> <C-W>N
  " make terminal windows hidden by default (copied from :help terminal)
  autocmd BufWinEnter * if &buftype == 'terminal' | setlocal bufhidden=hide | endif
endif


" NEOVIM_incompatible:
" 
if has('nvim') " Neovim?
  autocmd TermOpen term://* set nobuflisted
  " use default ESC key to leave insert mode in the internal terminal emulator
  tnoremap <Esc> <C-\><C-n>
" set shada+=n~/.vim/shada      | " shada file to use
"
  menu &UI.&Open\ in\ Serversession
        \ :execute ':!nvr --servername /tmp/nvimsocket --remote % +'.line('.')<CR>:stopinsert<CR>:set readonly<CR>

else           " default Vim?
  autocmd VimLeave * call system("echo -n $'" . escape(getreg(), "'") . "' | xsel -ib")

  set ttymouse=xterm2
  set ttyscroll=100   | " improves speed for terminal vim, incomp. with nvim
  set ttyfast         | " improves speed for terminal vim (incomp. with nvim)
  set nottybuiltin    | " use external termcaps
  set restorescreen   | " restores the console after exiting vim (intentionally not in nvim)
  "
  let g:loaded_ruby_provider = 1 " disable ruby support
  let g:loaded_python_provider = 1  " disable pthon3

  if version >= 702 " clean up (see: http://vim.wikia.com/wiki/VimTip396)
    autocmd BufWinLeave * call clearmatches()
  endif


  " scripts from the default vim installation, which do not get loaded by default, but are useful.
  if filereadable($VIMRUNTIME.'/macros/editexisting.vim')
    packadd! editexisting
  endif

  " load default plugin 'matchit' to allow % to jump between tags
  if filereadable($VIMRUNTIME.'/macros/matchit.vim')
    packadd! matchit
  endif

endif


if has("autocmd")
  set modeline                | " set variables specific to a file, like indentation by adding a comment
  " set default completion function in case YouCompleteMe cannot help
  " set omnifunc=syntaxcomplete#Complete

  augroup set_window_title " {
    " autocmd BufWinEnter quickfix setl statusline=%t
    " autocmd BufEnter * let &titlestring = hostname() . "[vim(" . expand("%:t") . ")]"
    autocmd CursorHold * let &titlestring = "%t %y ".$USER."@".hostname().":%{expand(\"%:~:.:h\")}"
    set title
    " autocmd CursorHold * let &titlestring = "Vim (".airline#extensions#tagbar#currenttag().")"

    " set window title for screen(3)
    if &term == "screen"
      set t_ts=k
      set t_fs=\
    endif
    if &term == "screen" || &term == "xterm"
      set titlelen=40
      set title
    endif
  augroup END

  augroup ChangeIcon
    "if filereadable("/usr/bin/xseticon")
    "if filereadable("~/.vim/nvim.png")
    " autocmd VimEnter * silent :execute "!xseticon -id $WINDOWID ~/.vim/nvim.png"
    " autocmd VimLeave * silent :execute "!xseticon -id $WINDOWID /usr/share/icons/gnome/32x32/apps/xfce-terminal.png"
    "endif
    "endif
  augroup END

  " Fix terminal title =================================================================================================
  " autocmd VimEnter * let &t_EI .= "\<Esc>[0 q"
  " autocmd VimEnter * let &t_SI = "\<Esc>]12;green\x7"
  autocmd VimLeave * silent !echo -ne "\033]112\007"

  " highlight word under the cursor ====================================================================================
  let w:m1 = 0
  function! HighlightWordUnderCursor()
      if(exists('w:m1') && w:m1 > 0)
        silent! call matchdelete(w:m1)
        let w:m1 = 0
      endif
      let l:currentword = escape(expand('<cword>'), '.')
      if(strlen(l:currentword) > 0)
        let w:m1=100
        silent! call matchadd('BoldUnderline', '\<'.l:currentword.'\>', -1, w:m1)
      endif
  endfunction
  autocmd! CursorHold,CursorHoldI * call HighlightWordUnderCursor()

  " hitting K over a keyword shows a help in a buffer.
  " Here we define the commands used to look those keywords up
  " as per file type...
  augroup filetype_specific
    autocmd FileType python setlocal keywordprg=pydoc
    autocmd FileType vim    setlocal keywordprg=:help |.
    autocmd FileType c,cpp  setlocal equalprg=clang-format
    autocmd FileType c,cpp  setlocal breakat-=-
    autocmd BufWinEnter * if &previewwindow | setlocal nonumber signcolumn=no filetype=c nobuflisted | endif


    " autocmd FileType c,cpp  setlocal iskeyword-=_

    " the following helps to make file=/etc/something work with gf, but disallows filenames with an equal sign in them
    autocmd FileType conf   setlocal isfname-==

    " keyboard mapping for xml alike languages
    " Alt-Up : Move cursor up one tag
    " Alt-Down: Move cursor down one tag
    " leader-=: tidies currently selected tag and subtags and sorts attributes by name (alphabetically)
    autocmd Filetype html,markdown,xml iabbrev </ </<C-X><C-O>
    autocmd Filetype html,htmldjango,xml
      \ :nnoremap
              \ <M-Down>
              \ :call search('^ *<', 'e')<CR>:nohlsearch<CR>|
      \ :nnoremap
              \ <M-Up>
              \ :call search('^ *<', 'eb')<CR>:nohlsearch<CR>|
      \ :nnoremap
              \ <leader>=
              \ vat:'<,'>!tidy -xml --wrap 0 --sort-attributes alpha 2>/dev/null<CR>vat=
  augroup END

  " autocmd BufNewFile set nobuflisted
  " use the shada/viminfo file to return the cursor to where it was...
  function! ReturnCursor()
    if line("'\"") > 1 && line("'\"") <= line("$")
      exe "normal! g`\""
    endif
  endfunction
  autocmd! BufReadPost * call ReturnCursor()


  augroup ToggleQuickFix
    function! ToggleQuickFix()
      if exists("g:qwindow")
        lclose
        unlet g:qwindow
      else
        try
          lopen 10
          let g:qwindow = 1
        catch
          echo "No Errors found!"
        endtry
      endif
    endfunction
    function! QFixToggle(forced)
      if exists("g:qfix_win") && a:forced == 0
        cclose
        unlet g:qfix_win
      else
        copen 10
        let g:qfix_win = bufnr("$")
      endif
    endfunction

    nmap <script> <silent> <F7> :call QFixToggle(0)<CR>
    nmap <script> <silent> <F8> :call ToggleQuickFix()<CR>
  augroup END

  augroup CurrentFileName
    " highlight the current files name inside the document...
    let @g = ":exe ':match SpellBad /'.escape(expand('%:t'), '.').'/'"
    " put the current files name after the cursor...
    let @f = ":exe ':normal a'.expand('%:t')"

    " grep all buffers for a given string and return result in a quickfix window
    let @q = ":cex [] | bufdo vimgrepadd /foo/g % | cw"

    let @l = ":let g:signify_vcs_cmds={'git': 'git diff --no-color --no-ext-diff -U0 HEAD^ -- %f'}|:SignifyRefresh"

    if has('menu')
        source $VIMRUNTIME/menu.vim
        set wildmenu
        set cpo-=<
        set wcm=<C-Z>

        01menu &Functions.toggle\ file\ browser
              \<Tab><leader><leader>
              \ <leader><leader>
        01menu &Functions.-Sep0- :

        01menu &Functions.help
              \<Tab><F1>
              \ <F1>
        01menu &Functions.bp:\ previous\ buffer
              \<Tab><F2>
              \ <F2>
        01menu &Functions.bn:\ next\ buffer
              \<Tab><F3>
              \ <F3>
        01menu &Functions.^wc\:\ close\ window
              \<Tab><F4>
              \ <F4>
        01menu &Functions.-Sep1- :

        01menu &Functions.make
              \<Tab><F5>
              \ <F5>
        01menu &Functions.clear\ matches,\ update\ viewport
              \<Tab><F6>
              \ <F6>
        01menu &Functions.copen\:\ show\ quickfix\ list
              \<Tab><F7>
              \ <F7>
        01menu &Functions.lopen\:\ show\ location\ list
              \<Tab><F8>
              \ <F8>
        01menu &Functions.-Sep2- :

        01menu &Functions.toggle\ tagbar
              \<Tab><F9>
              \ <F9>

        if has("gui_running") == 0
          " in the gui F10 already triggeres the menu, not in a terminal vim, so upgrade that...
          map <F10> :emenu <C-Z>
        endif
        01menu &Functions.activate\ menu\ (:emenu)
              \<Tab><F10>
              \ <F10>

        01menu &Functions.undef11
              \<Tab><F11>
              \ <F11>
        01menu &Functions.undef12
              \<Tab><F12>
              \ <F12>
        01menu &Functions.-Sep2- :


        09menu &Directory.print\ current\ directory
              \<Tab>:pwd
              \ :pwd<CR>

        09menu &Directory.-Sep- :

        09menu &Directory.Change\ to\ GIT\ root
              \<Tab>:Gcd
              \ :Gcd<CR>:pwd<CR>

        09menu &Directory.Change\ to\ current\ buffers\ directory\ (global)
              \<tab>:cd\ %:p:h
              \ :cd %:h<CR>:pwd<CR>

        09menu &Directory.Change\ to\ current\ buffers\ directory\ (local\ window)<tab>:lcd\ %:p:h
              \ :lcd %:p:h<CR>:pwd<CR>

        menu &Git.&Display\ last\ changes
              \ :let g:signify_vcs_cmds={'git': 'git diff --no-color --no-ext-diff -U0 HEAD^ -- %f'}<CR>:SignifyRefresh<CR>
        menu &Git.&Display\ significance\ of\ changes
              \ :!git diff --stat HEAD~1..HEAD
        menu &Git.&Display\ Changed\ files\ compared\ to\ master
              \ :!git diff --name-status ..master

        menu &Match.Clear\ All\ Matches
              \<Tab><F6>
              \ :call clearmatches()<CR>

        menu &Match.-Sep- :

        menu &Match.&dispensable\ white\ spaces
              \ :call matchadd("Convention", '\s\+$', 0)<CR>

        menu &Match.&long\ lines\ (exeeding\ textwidth)
              \ :call matchadd("Convention", '\%>'.&textwidth.'v.', 0)<CR>

        menu &Match.Highlight\ current\ file\ name
              \ :call matchadd("Search", escape(expand('%:t'), '.'))<CR>

        " :execute ':match SpellBad /'.escape(expand('%:t'), '.').'/'<CR>

        menu &Window.-Sep- :


        menu &Window.Scratch
              \ :Scratch<CR>


        menu &Find.file\ under\ the\ cursor
              \<Tab>gf
              \ gf

        menu &Find.Open\ search\ results\ in\ location\ list
              \<Tab>:gf
              \ :execute ':vimgrep /'.escape(getreg('/'), '.').'/g %'<CR>
              \ :copen<CR>

        menu &Changes.list
              \<Tab>:changes
              \ :changes<CR>
        menu &Changes.-Sep- :
        menu &Changes.previous
              \<Tab>g;
              \ g;
        menu &Changes.next
              \<Tab>g,
              \ g,

        menu &Jump.list
              \<Tab>:jumps
              \ :jumps<CR>
        menu &Jump.-Sep1- :
        menu &Jump.previous\ position
              \<Tab>CTRL-O
              \ <C-O>
        menu &Jump.next\ position
              \<Tab>CTRL-I
              \ <C-I>
        menu &Jump.-Sep2- :
        menu &Jump.clear\ list
              \<Tab>:clearjumps
              \ :clearjumps

       1000menu &Tag.list
              \<Tab>:tags
              \ :tags<CR>
       1000menu &Tag.selection\ list
              \<Tab>:ts
              \ :ts<CR>

       1000menu &Tag.-Sep1- :

       1000menu &Tag.stack.jump\ older
              \<Tab><C-T>
              \ :po
       1000menu &Tag.stack.jump\ 
              \<Tab>:ta
              \ :ta
    endif




    " exec current line as a command, insert output of command (from: https://youtu.be/MquaityA1SM?t=35m45s)
    nnoremap Q !!$SHELL<CR>

    " autocmd BufEnter * @f
  augroup END

  " autocmd VimEnter * set nobuflisted
endif


" ======================================================================================================================
" SHORTCUTS: custom shortcuts
" inoremap <C-Space> <C-x><C-o>
" inoremap <C-@> <C-Space>

" Bind CTRL+Backspace to vims version (CTRL+W) in " <CR> insert mode (only works with gvim)
inoremap
      \ <C-Backspace>
      \ <C-W>

" INDENTATION: allows deindenting a selected block and keeps selection
vnoremap < <gv
vnoremap > >gv

" make shift-home select to the beginning of the line
nnoremap <s-home> v^
nnoremap <s-end> v$

nnoremap <s-down> vj
vnoremap <s-down> j
nnoremap <s-up> vk
vnoremap <s-up> k


" close current buffer with <leader>q...
nnoremap <leader>q :bp<bar>sp<bar>bn<bar>bd<CR>.

nnoremap <silent> <F5> :make<CR>
nnoremap <silent> <F6> :silent syntax sync fromstart<CR>:nohlsearch<CR>:silent match<CR>:silent 2match<CR>:silent 3match<CR>
nnoremap <leader>r :syntax sync fromstart

nnoremap <silent> <A-Up>    :wincmd k<CR>
nnoremap <silent> <A-Down>  :wincmd j<CR>
nnoremap <silent> <A-Left>  :wincmd h<CR>
nnoremap <silent> <A-Right> :wincmd l<CR>

" INSERT_MODE_MAPPINGS:
" default copy&paste insert key binding (just in insert mode, so it doesn't conflict
" with visual block mode)- would have been nice, but collides with c-w for digraphs
" inoremap <C-V> <C-R>+
"
inoremap <C-S> <C-O>:w<CR>

" NEOVIM_SPECIFIC:
if has('nvim') " only neovim...
  " shortcut \t opens a terminal in a horizontal split
  nnoremap <leader>t :new +terminal<CR>
endif



" ======================================================================================================================
" START: LOADING PLUGINS
" ↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
call plug#begin()
" Colorschemes:
Plug 'coderonline/vim-remote-menu'
" Plug 'bbchung/clighter8'
" Plug 'octol/vim-cpp-enhanced-highlight'
" Plug 'vim-scripts/TagHighlight'
" if ! exists('g:TagHighlightSettings')
"   let g:TagHighlightSettings = {}
" endif
" let g:TagHighlightSettings['TagFileName'] = 'tags'
" let g:TagHighlightSettings['CtagsExecutable'] = 'ctags'

Plug 'chriskempson/base16-vim'        | " not just one high quality color scheme (all named base16-*)
Plug 'NLKNguyen/papercolor-theme'     | " the one I like the most

Plug 'mhinz/vim-signify'              | " uses the sign column to indicate added, modified and removed lines
Plug 'tpope/vim-fugitive'             | " the most complete GIT integration plugin
Plug 'godlygeek/tabular'              | " align code on a sign, like :Tab/=
Plug 'severin-lemaignan/vim-minimap'
Plug 'tpope/vim-surround'             | " plugin makes cs"' inside a line replace " with '
let g:signify_vcs_list = [ 'git' ]    | " use signify only with git (improves speed when loading buffers, see :h signify)
let g:signify_cursorhold_insert     = 1
let g:signify_cursorhold_normal     = 1
let g:signify_update_on_bufenter    = 0
let g:signify_update_on_focusgained = 1

" BUFEXPLORER:                        | " a buffer to list all buffers has the advantage, that default /-searches work in there
Plug 'jlanzarotta/bufexplorer'
nnoremap <F12> :ToggleBufExplorer<CR>

" NERDTree: replaces NetRW, as long as it has so many bugs
Plug 'scrooloose/nerdtree'            | "
let NERDTreeIgnore                = ['\.aux$', '\.o$']
let NERDTreeCascadeSingleChildDir = 0 | " I don't get how one can use <m> to create files in that included directory
let NERDTreeChDirMode             = 0
let NERDTreeHiddenFirst           = 1
let NERDTreeMinimalUI             = 1
let NERDTreeShowBookmarks         = 1 | " show bookmarks by default (when opening for the first time)
let NERDTreeWinSize               = 40
let NERDTreeQuitOnOpen            = 1

" depending on if NERDTree has the focus:
nnoremap <expr>
       \ <leader><leader>
       \ bufwinnr("%")==g:NERDTree.GetWinNum() ? ':NERDTreeClose<CR>' : ':NERDTreeFind<CR>'
nnoremap <expr>
       \ <F2>
       \ bufwinnr("%")==g:NERDTree.GetWinNum() ? '<C-W><C-W>' : ':N<CR>'

nnoremap <expr>
       \ <F3>
       \ bufwinnr("%")==g:NERDTree.GetWinNum() ? '<C-W><C-W>' : ':n<CR>'

nnoremap <F4>
       \ :wincmd c<CR>
" close NERDTree if it is the last remaining window (taken from the official documentation)
" autocmd bufenter *
"       \ if (winnr("$") == 1 && exists("b:NERDTree") && b:NERDTree.isTabTree()) | q | endif
"

" Additional: ========================================.
Plug 'sheerun/vim-polyglot'                   " better syntax highlighting/indentation for multiple languages
let g:javascript_conceal_function             = "ƒ"
let g:javascript_conceal_null                 = "ø"
let g:javascript_conceal_this                 = "@"
let g:javascript_conceal_return               = "⇚"
let g:javascript_conceal_undefined            = "¿"
let g:javascript_conceal_NaN                  = "ℕ"
let g:javascript_conceal_prototype            = "¶"
let g:javascript_conceal_static               = "•"
let g:javascript_conceal_super                = "Ω"
let g:javascript_conceal_arrow_function       = "⇒"

Plug 'majutsushi/tagbar' " superseeds taglist-plus, which isn't maintained any more
let g:tagbar_autoclose   = 0
let g:tagbar_autofocus   = 1
let g:tagbar_autoshowtag = 0
let g:tagbar_compact     = 1
let g:tagbar_indent      = 0
let g:tagbar_foldlevel   = 99

nnoremap <F9> :TagbarToggle<CR>| " bind TagBar to hotkey F9


" LIGHTLINE: a fancy status line =======================================================================================
set laststatus=2  | " required by AirLine and Lightline, without status line does not appear until a window split

Plug 'itchyny/lightline.vim'
" Plug 'taohex/lightline-buffer'

" lightline-buffer ui settings
" replace these symbols with ascii characters if your environment does not support unicode
let g:lightline_buffer_logo                     = ''
let g:lightline_buffer_readonly_icon            = ''
let g:lightline_buffer_modified_icon            = '✭'
let g:lightline_buffer_git_icon                 = ' '
let g:lightline_buffer_ellipsis_icon            = '..'
let g:lightline_buffer_active_buffer_left_icon  = ' '
let g:lightline_buffer_active_buffer_right_icon = ''
" let g:lightline_buffer_separator_icon           = 'XX'

" lightline-buffer function settings
let g:lightline_buffer_show_bufnr               = 0
let g:lightline_buffer_rotate                   = 0
let g:lightline_buffer_fname_mod                = ':t'
let g:lightline_buffer_excludes                 = ['vimfiler']
let g:lightline_buffer_maxflen                  = 30
let g:lightline_buffer_maxfextlen               = 3
let g:lightline_buffer_minflen                  = 16
let g:lightline_buffer_minfextlen               = 3
let g:lightline_buffer_reservelen               = 20

"     \                ['warnings', 'errors', 'syntastic']
"    \     'left': [ [ 'bufferinfo' ], [ 'bufferbefore', 'buffercurrent', 'bufferafter' ], ],
let g:lightline = {
    \   'tabline': {
    \     'left': [ [ 'servername', 'sessionname' ] ],
    \     'right': [ [], ['gitbranch', 'tabnumber'] ],
    \   },
    \   'colorscheme': 'Tomorrow',
    \   'separator': { 'left': "\uE0B4", 'right': "\uE0B6" },
    \   'subseparator': { 'left': "\uE0b1", 'right': "\uE0b3" },
    \   'inactive': {
    \     'left': [ ['absolutepath'] ],
    \     'right': []
    \   },
    \   'active': {
    \     'left': [ [ 'mode', 'paste' ], ['readonly', 'filetype'], [ 'absolutepath' ]],
    \     'right': [ [ 'lineinfo', 'percent' ], [ 'spell', 'fileencoding', 'fileformat' ] , ['tagbar'] ]
    \   },
    \   'component': {
    \     'tagbar': '%{substitute(tagbar#currenttag("%s", "", "fs"), "\(.*\)", "", "")}',
    \     'ycmparent': '%{substitute(execute("YcmComplete GetParent"), "\(.*\)", "", "")}',
    \     'filename': '%t',
    \     'buffer_alt': '%{expand("#:t")}',
    \     'servername': ' %{v:servername}',
    \     'sessionname': '%{v:this_session}',
    \     'gitbranch': ' %{fugitive#head()}',
    \     'tabnumber': " %{tabpagenr()}/%{tabpagenr('$')}",
    \     'readonly': '%{&readonly ? "" : ""}'
    \   },
    \   'component_expand': {
    \     'buffercurrent': 'lightline#buffer#buffercurrent2',
    \     'syntastic': 'SyntasticStatuslineFlag',
    \   },
    \   'component_function': {
    \     'bufferinfo': 'lightline#buffer#bufferinfo',
    \     'warnings': 'youcompleteme#GetWarningCount',
    \     'errors': 'youcompleteme#GetErrorCount',
    \   },
    \ }

set noshowmode | " mode will be shown twice, in lightline and below, so we want to deactivate one
" set statusline=
" set statusline+=%t%m
" set statusline+=%{TagInStatusLine()}
" set statusline+=%#warningmsg#
" set statusline+=%{SyntasticStatuslineFlag()}
" set statusline+=%*%=
" set statusline+=%l:%c(%p%%)

" Autocompleter: =====================================
if has("python")

  " ULTISNIPS: code snippet ============================================================================================
  Plug 'honza/vim-snippets'                      " dependency of ultisnips (see below)
  Plug 'SirVer/ultisnips'                        " replaces loremipsum (and many more)
  let g:UltiSnipsExpandTrigger       = '<Tab>'|  " expands the snippet, be careful not to use <tab> elsewhere (ycm uses it by default, but it has been deactivated by g:ycm_key_list_select_completion)

  let g:UltiSnipsJumpForwardTrigger  = '<Tab>'| 
  let g:UltiSnipsJumpBackwardTrigger = '<S-Tab>'|
  "d let g:UltiSnipsJumpForwardTrigger  = '<PageDown>'
  " let g:UltiSnipsJumpBackwardTrigger = '<PageUp>'
  "let g:UltiSnipsExpandTrigger       = '<C-j>'| " Trigger configuration. Do not use <tab> if you use https://github.com/Valloric/YouCompleteMe.
  "let g:UltiSnipsJumpForwardTrigger  = '<C-j>'| " \
  "let g:UltiSnipsJumpBackwardTrigger = '<C-k>'| " \
  "let g:UltiSnipsListSnippets        = '<C-`>'| " YouCompleteMe includes those, so this isn't necessary
  "let g:UltiSnipsListSnippets        = '<leader><leader>'| " YouCompleteMe includes those, so this isn't necessary
  """ Ultisnips
  " let g:UltiSnipsExpandTrigger="<c-tab>"
  " let g:UltiSnipsListSnippets="<c-s-tab>"

  if has('nvim')
    Plug 'Shougo/deoplete.nvim', { 'do': ':UpdateRemotePlugins' }
    Plug 'tweekmonster/deoplete-clang2'
    " Use deoplete.
    let g:deoplete#enable_at_startup = 1
  else

    " YouCompleteMe: =====================================================================================================
    " Plug 'Valloric/MatchTagAlways'                           " highlights the closing tag/brace/...
    Plug 'Valloric/YouCompleteMe'
    let g:ycm_error_symbol                             = '✖' " insert this as an error symbol in the gutter bar/sign column
    let g:ycm_warning_symbol                           = '➔' " insert this as a warning symbol in the gutter bar/sign coloumn

    let g:ycm_autoclose_preview_window_after_insertion = 0
    let g:ycm_auto_trigger                             = 1
    let g:ycm_collect_identifiers_from_tags_files      = 1   " Let YCM read tags from Ctags file
    let g:ycm_confirm_extra_conf                       = 0   " security is overrated ;)

    let g:ycm_key_list_previous_completion             = ['Up']
    let g:ycm_key_list_select_completion               = ['Down']

    " Plug 'vim-scripts/dbext.vim'                       " dependency to allow db related completions
    " let g:ycm_server_python_interpreter                = 'python3'
    " let g:ycm_python_binary_path                       = '/usr/bin/python3' " the python interpreter of choice (for code checking)
    " let g:ycm_add_preview_to_completeopt               = 1   " reuse existing preview window
    " let g:ycm_seed_identifiers_with_syntax             = 1   " Completion for programming language's keyword
    " let g:ycm_complete_in_comments                     = 1   " Completion in comments
    " let g:ycm_complete_in_strings                      = 1   " Completion in string
    " let g:ycm_min_num_of_chars_for_completion          = 6   " we normally avoid identifier based completion, it just helps with long words. Use semantic completions with <C-Space> instead (terrible idea, html snippets not working!)
    " let g:ycm_min_num_identifier_candidate_chars       = 4
    " let g:ycm_max_num_identifier_candidates            = 10
    " let g:ycm_max_num_candidates                       = 50
    " let g:ycm_use_ultisnips_completer                  = 1   " Default 1, just ensure
    " let g:ycm_key_list_select_completion               = ['<Down>']
    " let g:ycm_key_list_previous_completion             = ['<Up>']
    " let g:ycm_global_ycm_extra_conf                    = '.ycm_extra_conf.py'
    " let g:ycm_semantic_triggers                        = { 'c': [ 're!.' ] }
    " " let g:ycm_disable_for_files_larger_than_kb         = 16384 " we have faaast computers, don't we?
    " let g:ycm_show_diagnostics_ui                      = 0
    " " disable <tab>-key for YCM so that it can be used with ultisnips
    " let g:ycm_key_list_select_completion=[]
    " let g:ycm_key_list_previous_completion=[]
  endif


  " SYNTASTIC: =========================================================================================================
  if has('nvim')
    Plug 'w0rp/ale'
    let g:ale_sign_error       = ''
    let g:ale_sign_style_error = ''
    let g:ale_sign_info        = ''
    let ale_sign_warning       = ''
  else


    Plug 'scrooloose/syntastic'
    set statusline+=%#warningmsg#
    set statusline+=%{SyntasticStatuslineFlag()}
    let g:LatexBox_latexmk_preview_continuously = 1
    let g:LatexBox_viewer                       = "evince"
    let g:syntastic_always_populate_loc_list    = 1
    let g:syntastic_auto_loc_list               = 0
    let g:syntastic_check_on_open               = 1
    let g:syntastic_check_on_wq                 = 0
    " let g:syntastic_quiet_messages              = {"type":"style"}
    "
    " E221: multiple spaces before Operator
    let g:syntastic_python_flake8_args          = '--max-complexity=10 --max-line-length=120 --exclude venv --doctests --exit-zero --ignore=E221'
    " filter ( = do not display) style/formatting errors and warnings
    let g:syntastic_error_symbol                = '✖'
    let g:syntastic_style_error_symbol          = '✗'
    let g:syntastic_warning_symbol              = '➔'
    let g:syntastic_style_warning_symbol        = '≈'
  endif

  " JEDI: ==============================================================================================================
  Plug 'davidhalter/jedi-vim'               " jedi gets used to display python function signatures
  let g:jedi#completions_enabled        = 0 " we do not need completions, because we have YouCompleteMe
  let g:jedi#show_call_signatures       = 1 " which sadly does not support signatures like jedi
  let g:jedi#show_call_signatures_delay = 0
  let g:jedi#auto_vim_configure         = 0
  let g:pymode_rope                     = 0 " https://github.com/davidhalter/jedi-vim/issues/163
  " autocmd FileType python jedi.preload_module('os', 'sys', 'math')
  " let g:pymode_options_max_line_length          = 120
  " let g:syntastic_python_flake8_args='--ignore=F821,E302,E501,E241,E301'

endif " has("python")

"=======================================================================================================================
" TESTING:                            | " plugins which I am currently trying...
"=======================================================================================================================
" Plug 'rhysd/vim-clang-format'     | unnecessary, because we can just :pyf /usr/share/clang/clang-format.py
Plug 'kana/vim-operator-user' " dependency, which allows overriding the = operator for indentation

" TODO: check if this is unrequired, when set equalprog is set to that py file
autocmd FileType c,cpp,objc map <buffer> = :pyf /usr/share/clang/clang-format.py<CR>

" let g:clang_format#detect_style_file     = 1
" autocmd FileType c,cpp,objc map <buffer> = <Plug>(operator-clang-format)

" Plug 'tpope/vim-characterize'       | " normal mode: make ga show character names of Unicode chars (ga shows hex and dec values)
" Plug 'rkitover/vimpager'
" found this command instead (use as PAGER):
" man -P 'nvim -R -u NORC -c":%!col -b" -c":set buftype=nowrite filetype=man" -' ls


"=======================================================================================================================
call plug#end()                                       | " all plugins are getting loaded on this line, don't remove!
" ↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑
" END: LOADING PLUGINS
" ======================================================================================================================

" Deprecated with this configuration, but still useful when deactivating some Plugins
" NETRW: obsolete with NERDTree
let g:netrw_alto          = 0       | " open files on the right
let g:netrw_altv          = 1       | " open files on the right
let g:netrw_banner        = 0       | " display help messages?
let g:netrw_browse_split  = 4       | " 4=open in previous window
let g:netrw_fastbrowse    = 2       | " manually refresh direcory list (avoids display errors)
let g:netrw_hide          = 1       | " show not-hidden files only
let g:netrw_keepdir       = 0
let g:netrw_list_hide     = '^\..*' | " Explore mode: hide files starting with dot
let g:netrw_liststyle     = 3       | " 3=tree
let g:netrw_preview       = 0       | "
let g:netrw_winsize       = 20      | " window size in percent

" ======================================================================================================================
" COLORSCHEME:
" ======================================================================================================================

function! ExtendColorTheme()
  filetype on
  filetype plugin on
  filetype indent on

  syntax on                     | " enable syntax highlighting
  syntax sync minlines=60       | " how many preceding lines will be parsed? (has performance impact)

  " use the default terminal background color as background (allows transparency)
  " highlight! Normal guibg=NONE ctermbg=NONE
  " highlight! NonText guibg=NONE guifg=black ctermbg=NONE ctermfg=black

  " make the ~ (tilde) indicator invisible, which usually marks the EOF
  highlight! link EndOfBuffer Ignore

  highlight! CursorLineNr cterm=inverse | " ctermbg=black ctermfg=NONE
  highlight! Pmenu ctermbg=LightYellow ctermfg=DarkGrey
  highlight! PmenuSel ctermbg=blue ctermfg=LightYellow cterm=bold

  highlight! link PmenuSbar Pmenu
  highlight! PmenuThumb cterm=inverse
  highlight! MoreMsg cterm=inverse
  highlight! link Folded LineNr
  highlight! Cursor guibg=#729fcf ctermbg=yellow
  highlight! link VertSplit LineNr
  " highlight! SpellBad ctermbg=none
  highlight! SpecialKey ctermfg=19
  highlight! WhiteSpace ctermfg=19

  highlight! link TabLine LineNr
  highlight! TabLineSel ctermbg=blue ctermfg=black
  highlight! link TabLineFill LineNr
  highlight! Search ctermbg=LightYellow ctermfg=black guibg=#fefd86 guifg=#222222
  highlight! link WildMenu Search

  " generic, which should exist but don't
  highlight! Bold cterm=bold gui=bold
  highlight! Italic cterm=italic gui=italic
  highlight! Underline cterm=underline gui=underline
  highlight! BoldUnderline cterm=bold,underline gui=bold,underline
  highlight! BoldItalic cterm=Bold,Italic gui=Bold,Italic

  " make tab stop (see listchars) less disturbing...
  highlight! link SpecialKey NonText

  " highlight! link LightlineMiddle_tabline ColorColumn
  " highlight! link LightlineLeft_tabline_1 ColorColumn
  " highlight! link LightlineLeft_tabline_0_1 ColorColumn


  highlight! Todo guibg=#ffffaa guifg=#000000 gui=bold term=bold
  highlight! cStatement guifg=red gui=bold term=bold

  " automatically enter list mode when going in insert mode (makes above syntax command temporarily ineffective)
  autocmd InsertEnter * set list
  autocmd InsertLeave * set nolist

  " highlight double words (its unlikely they are right)
  autocmd InsertLeave * syntax match Convention /\v<(\w+)\_s+\1>/ containedin=ALL

  " Show trailing whitepace and spaces before a tab as part of the syntax highlighting
  highlight! link Convention Error
  autocmd BufEnter,InsertLeave * syntax match Convention /\s\+$\| \+\ze\t/ containedin=ALL
  autocmd InsertEnter * syntax clear Convention
  " autocmd BufEnter,InsertLeave * execute ':syntax match Convention /\%>'.&textwidth.'v./ containedin=ALL'

  autocmd InsertEnter * set colorcolumn=80,120
  autocmd InsertLeave * set colorcolumn&
  " set colorcolumn=                  | " not used, because we have a :match directive for textwidth

endfunction
autocmd! ColorScheme * call ExtendColorTheme()


set termguicolors | " When on, uses highlight-guifg and highlight-guibg attributes in the terminal (=24bit color) incomp. with nvim
" set t_ut=

if filereadable(expand("~/.vimrc_background")) && filereadable(expand("~/.config/base16-shell/colortest"))
  let g:base16_shell_path="~/.config/base16-shell/scripts"
  let base16colorspace=256
  set background=dark
  source ~/.vimrc_background
else
  let g:PaperColor_Theme_Options = {
  \   'theme': {
  \     'default': {
  \       'transparent_background': 1
  \     }
  \   }
  \ }
  set background=dark
  colorscheme PaperColor
endif


" ======================================================================================================================
" TESTING:
" ======================================================================================================================
" avoids openin an empty buffer when restoring bufferlist from viminfo...
" if argc() == 0
"     silent autocmd VimEnter * nested :silent bun
" endif

autocmd VimEnter,WinEnter * exec ':set scrolljump='.winheight(0)/2
 
" display highlight group under the cursor
map <leader>h :echo map(synstack(line('.'), col('.')), 'synIDattr(v:val, "name")')<CR>