call plug#begin()
" Brilliant_Plugins_by_tpope: ========================.
Plug 'tpope/vim-sensible' | " a sane and modern default configuration
Plug 'tpope/vim-surround' | " plugin makes cs"' inside a line replace " with '
Plug 'tpope/vim-vinegar' | " Improves :Explore
" Plug 'tpope/vim-characterize' | " normal mode: make ga show character names of Unicode chars (ga shows hex and dec values)
" Plug 'tpope/vim-fugitive' | " the most complete GIT integration plugin
" Plug 'tpope/vim-repeat' | " lets . (dot) repeat plugin macros as well, specifically vim-surround
" Colorschemes: ======================================.
Plug 'nelstrom/vim-mac-classic-theme' | " light theme
Plug 'Valloric/vim-valloric-colorscheme' | "
Plug 'chriskempson/vim-tomorrow-theme' | "
Plug 'chriskempson/base16-vim' | "
" AIRLINE: ===========================================.
Plug 'vim-airline/vim-airline' | " beautification of the mode line
let g:airline_detect_modified = 0 |
let g:airline_detect_paste = 0 |
let g:airline_exclude_preview = 1 |
let g:airline_extensions = ['tabline']
let g:airline#extensions#tabline#disable_refresh = 1 |
let g:airline#extensions#tabline#enabled = 1 |
let g:airline#extensions#tabline#fnamemod = ':t:.' | " let airline just show the filename without its path
let g:airline#extensions#tabline#show_buffers = 1 |
let g:airline#extensions#tabline#show_tabs = 0 |
let g:airline#extensions#tagbar#enabled = 1 |
let g:airline#extensions#tagbar#flags = 's'
let g:airline#extensions#whitespace#enabled = 0 |
let g:airline#extensions#wordcount#enabled = 0 |
let g:airline_inactive_collapse = 1 |
let g:airline_powerline_fonts = 1 |
let g:airline_section_c = '%F'
" AIRLINE_Theme: =====================================.
Plug 'vim-airline/vim-airline-themes' | " airline themes to match any light and dark terminal using :AirlineTheme
let g:airline_theme='base16' | " specifies which colorscheme should airline uses
" let g:airline_theme='bubblegum' | " specifies which colorscheme should airline uses
" let g:airline_theme='dark' |
" let g:airline_theme='luna' | " specifies which colorscheme should airline uses
" let g:airline_theme='papercolor' | " specifies which colorscheme should airline uses
" let g:airline_theme='tomorrow' | " specifies which colorscheme should airline uses
" Additional: ========================================.
Plug 'sheerun/vim-polyglot' | " better syntax highlighting/indentation for multiple languages
Plug 'taglist-plus' | " quick code navigator
" Autocompleter: =====================================.
Plug 'Valloric/MatchTagAlways'
Plug 'Valloric/YouCompleteMe'
let g:ycm_collect_identifiers_from_tags_files = 1 " Let YCM read tags from Ctags file
let g:ycm_use_ultisnips_completer = 1 " Default 1, just ensure
let g:ycm_seed_identifiers_with_syntax = 1 " Completion for programming language's keyword
let g:ycm_complete_in_comments = 1 " Completion in comments
let g:ycm_complete_in_strings = 1 " Completion in string
Plug 'scrooloose/syntastic'
set statusline+=%#warningmsg#
set statusline+=%{SyntasticStatuslineFlag()}
set statusline+=%*
let g:LatexBox_latexmk_preview_continuously = 1
let g:LatexBox_viewer = "evince"
let g:syntastic_always_populate_loc_list = 1
let g:syntastic_auto_loc_list = 1
let g:syntastic_check_on_open = 1
let g:syntastic_check_on_wq = 0
Plug 'davidhalter/jedi-vim' | " jedi gets used to display python function signatures
let g:jedi#completions_enabled = 0 | " we do not need completions, because we have YouCompleteMe
let g:jedi#show_call_signatures = 1 | " which sadly does not support signatures like jedi
let g:jedi#show_call_signatures_delay = 0
let g:jedi#auto_vim_configure = 0
Plug 'SirVer/ultisnips' | " replaces loremipsum (and many more)
Plug 'honza/vim-snippets' | " dependency of ultisnips
" Trigger configuration. Do not use <tab> if you use https://github.com/Valloric/YouCompleteMe.
"" Ultisnips
let g:UltiSnipsExpandTrigger="<c-tab>"
let g:UltiSnipsListSnippets="<c-s-tab>"
" If you want :UltiSnipsEdit to split your window.
let g:UltiSnipsEditSplit="vertical"
" Disabled ===========================================.
" Plug 'Shougo/neocomplete.vim' | " alternative to YouCompleteMe in some cases
" Plug 'Shougo/vimproc.vim' | " dependency for other Shougo plugins
" Plug 'indenthtml.vim' | " works better with mixed html/css/javascript
" Plug 'evanmiller/nginx-vim-syntax' | " TODO: check if now included in syntastic?
call plug#end() | " all plugins are getting loaded on this line, don't remove!
filetype on
filetype plugin on
filetype indent on
syntax on | " enable syntax highlighting
syntax sync minlines=60 | " how many preceding lines will be parsed? (has performance impact)
" set term=xtermc | " required on solaris
let base16colorspace=256
colorscheme base16-phd
" colorscheme Tomorrow
" colorscheme Tomorrow-Night
" colorscheme Tomorrow-Night
" colorscheme Tomorrow-Night-Blue
" colorscheme Tomorrow-Night-Bright
" colorscheme base16-default-dark
" colorscheme mac_classic | " finally set which colorscheme to use
" colorscheme pencil
" colorscheme valloric
" colorscheme vividchalk | " finally set which colorscheme to use
" Shortcut mods =======================================.
inoremap <C-Space> <C-x><C-o>
"inoremap <C-@> <C-Space>
" keep selection when indenting a selected block:
vnoremap < <gv
vnoremap > >gv
nnoremap <C-Tab> :bn<CR>| " lets one use CTRL+Tab to switch between tabs
nnoremap <C-S-Tab> :bp<CR>| " use CTRL+Shift+Tab to switch to preview tab
nnoremap <C-l> :TlistToggle<CR>| " bind TagList to Hotkey Ctrl+L
" settings ============================================.
" set shell=/bin/bash | " many scripts rely on bash, but its path varies why it is commented out here
set noshowmode | " because we are using some powerline derivat
set hidden | " allows switiching buffers even if the current buffer contains changes (displays +)
set confirm | " asks 'do you want to save?'
set t_Co=256 | " required on some ssh sessions
set ts=2 sts=2 sw=2 expandtab | " indentation which i like (abbr: tabstop, softtabstop, shiftwidth)
set scrolljump=5 | " how many lines get scrolled into view when cursor reaches the screens edge
set encoding=utf-8 | " set up vim's cosole encoding (not file encoding, for which there is fileencoding=)
set ignorecase smartcase | " search with ignorecase by default, but use case sensitive search when one captical char is contained
set ttimeoutlen=10 | " set esc key timeout in ms-
set notimeout ttimeout | " improves performance but is known to cause problems on slow terminals
set linebreak | " wrap long lines at char 'breakat', not inside words
set nowrap | " but do not (by default) wrap long lines around
set clipboard=unnamedplus | " makes copy and paste work (autoselectplus might work as well)
set nonumber | " turn line numbers off (improves performance)
set nocursorline | " turn visual cursor line off (improves performance)
set nocursorcolumn | " turn visual cursor column off (improves performance)
set ttyscroll=100 | " improves speed for terminal vim
set ttyfast | " improves speed for terminal vim
set lazyredraw | " disables redraw during macro exectution (improves performance)
set re=1
set relativenumber | " displays current lines line no as zero point from where relative numbers are getting counted
set nofoldenable | " disable code folding. I hate code folding
set spell spelllang=en,de | " enable spell checker
set nostartofline | " when scrolling: do not move the cursor to column 1
set thesaurus+=/home/max/.vim/thesaurus/php.txt
set splitbelow | " open new windows below the current one (i find that more intuitive)
set laststatus=2
set nocursorcolumn
set nocursorline
set norelativenumber
set writedelay=0
if has("multi_byte")
set encoding=utf-8 | " we need default utf-8 encoding to use cool chars as line break and so on (see below)
scriptencoding utf-8 | " tell vim that we are using utf-8 here
set showbreak+=› | " symbol used in the beginning of a wrapped line
set listchars=eol:↲ | " symbols used when using :set list (which displays non-printable chars)
set listchars+=trail:· | " symbols used when using :set list (which displays non-printable chars)
set listchars+=precedes:« | " symbols used when using :set list (which displays non-printable chars)
set listchars+=extends:» | " symbols used when using :set list (which displays non-printable chars)
set listchars+=tab:▸\ | " symbols used when using :set list (which displays non-printable chars)
end
if has("gui_running")
set guioptions+=eig
set guioptions-=T | " toolbar
set guioptions+=c | " use console dialogs instead of popups
set guioptions+=a | " autoselect: copy&paste using middleclick
set guioptions-=m | " remove menu
" set guifont=Droid\ Sans\ Mono\ for\ Powerline\ 12
set guifont=Dejavu\ Sans\ Mono\ for\ Powerline\ 12
set guioptions-=e | " do not display tabs
endif
if bufname('%') == ''
set bufhidden=wipe
endif
noautocmd
if has("autocmd")
set modeline | " set variables specific to a file, like indentation by adding a comment
" set default completion function in case YouCompleteMe cannot help
set omnifunc=syntaxcomplete#Complete
" automatically reload this file when it gets edited
augroup reload_vimrc " {
autocmd!
autocmd BufWritePost $MYVIMRC source $MYVIMRC
augroup END " }
augroup remove_whitespaces " {
" automatically remove trailing white spaces on save..
autocmd BufWritePre * %s/\s\+$//e
augroup END " }
augroup set_window_title " {
" autocmd BufWinEnter quickfix setl statusline=%t
autocmd BufEnter * let &titlestring = hostname() . "[vim(" . expand("%:t") . ")]"
" set window title for screen(3)
if &term == "screen"
set t_ts=k
set t_fs=\
endif
if &term == "screen" || &term == "xterm"
set title
endif
augroup END
augroup visual_mode_shows_unprintable " {
set list | " shows unprinable characters in the current line
autocmd ColorScheme * highlight NonText ctermbg=0 guifg=#061229
"
"
" highlight NonText guifg=#1d1f21 | " make non printable chars invisible. The active line is an exception.
" highlight ColorColumn guibg=#005f87
" highlight ColorColumn guibg=#F0F0E0
augroup END " }
"set omnifunc=syntaxcomplete#Complete
" au BufNewFile,BufRead,BufEnter *.cpp,*.hpp set omnifunc=omni#cpp#complete#Main
" Enable omni completion.
" autocmd FileType css setlocal omnifunc=csscomplete#CompleteCSS
" autocmd FileType html,markdown setlocal omnifunc=htmlcomplete#CompleteTags
" auto complete closing tag name when entering </-[space]
" autocmd Filetype html,markdown,xml iabbrev </ </<C-X><C-O>
" autocmd FileType python setlocal omnifunc=jedi#completions
" following autocommands are there to call neovim functions...
" autocmd FileType python setlocal omnifunc=pythoncomplete#Complete
" autocmd FileType javascript setlocal omnifunc=javascriptcomplete#CompleteJS
" autocmd FileType xml setlocal omnifunc=xmlcomplete#CompleteTags
" " Enable heavy omni completion.
" if !exists('g:neocomplete#sources#omni#input_patterns')
" let g:neocomplete#sources#omni#input_patterns = {}
" endif
endif
" if filereadable(expand("~/.vimrc_background"))
" let base16colorspace=256
" source ~/.vimrc_background
" endif
" set colorcolumn=80 | " show an indicator (different background in column 80)
" set title
" set t_ts=^[k
" set t_fs=^[\
" auto BufEnter * :set title | let &titlestring = 'v:' . expand('%')
" auto VimLeave * :set t_ts=^[k^[\
"
" ALTERNATIVE: |
" LightLine_and_MiniBufExplorer: =====================.
" Plug 'itchyny/lightline.vim'
" let g:lightline = {
" \ 'colorscheme': 'PaperColor',
" \ 'separator': { 'left': "\ue0b0", 'right': "\ue0b2" },
" \ 'subseparator': { 'left': "\ue0b1", 'right': "\ue0b3" }
" \ }
" Plug 'fholgado/minibufexpl.vim'
" let g:miniBufExplAutoStart = 1
" let g:miniBufExplBRSplit = 1
" let g:miniBufExplShowBufNumbers = 0
" let g:miniBufExplSplitToEdge = 1
" let g:miniBufExplVSplit = 20 " column width in chars